Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Gary, for your comparision this CHE may be of interest. Its a few years later than yours and is as built originally except that it went back to Parker to have the safety added. Also, I replaced the hardened and brittle recoil pad with a new leather faced Silver's. This configuration was popular at the time for targets. Sometimes they are called "live bird guns" but they were used on targets of all forms; birds, clay disks, glass balls, bituminous formed balls, etc. This one has a 2" DAH, 1 1/2" DAC. Some people complain about Parkers "all" having excessive drop. Some do , some don't.
Original charcoal case colors. Original splinter forend. It was patterned when made with nitro ( smokeless) powder at 1 1/8oz at 3 drams equivalent, which runs out to about 1200 fps, which is the same load I use today from Federal, Remington, etc. Chokes are .035 and .040, so you can pick off one side or the other of a clay target with the tight barrel. I expect yours would have much the same characteristics unless altered.
Enjoy and treasure your new Parker.
The Following 8 Users Say Thank You to Bruce Day For Your Post: