Parker parts
Thank you for allowing me to participate on your forium. This is my very first forium posting ever. Reasontly I aguired an AH Fox and a Parker Lifter hammer gun ser no 14075. It is a 10ga O grade No 3 frame with 28 in barrells.It is the lightest 10ga I have ever seen. I would like to be able to shoot this gun but it has a few mechanical problems that need to be addressed. The hammers on the gun are miss matched.The right hammer is serial No to the gun, the left one is a parker replacement without a serial no. unfortunatly the right hammer is cracked badly and should probably be replaced. The left toumbler and sear are worn. Unfortunatly while dissasembleing the gun I droped the rear triger on my tile floor. To my comeplete surprise it snapped in too. Are the parts the same on a 12ga lifter gun as a 10ga lifter gun. Any information on where I could aquire these parts would be much appreciated. P.S I Iam currious as to the barrel lenth. Is it original or has it been cut back,if so somebody knew what they were doing. Thank you for your help.
|
Threaded Mode