.410 Repro Ejectors

[Pittypatdugan]

This has been my experience with the new .410 CSC Barrels as far as shooting and shell ejection. The chambers are very tight, only new shells and specially re sized reloads will seat correctly. I shot some reloads made from a MEC grabber that would not go into the chambers. I then used some old shells re sized in an old mec 600 and they worked fine so that tells me that the collect needs adjustment on the grabber. Even shooting new shells very few would eject correctly. I used 0000 steel wool on a brass brush and polished the chambers but no help. The shells are elevated enough to easily remove, being pushed out 1/2 inch. Most shells not usable in the Parker could be easily shot in a Browning 525 .410 and ejected.

What is your advice to make the ejection better?

thanks in advance

PDD