Let me guess, your local gun shop offered you $500 or something for it. lol. I know of a few that might do such a thing.
As long as the bores are not in VERY bad shape by way of HEAVY pitting, and the ribs are not separated, shoot away. Try to stay away from shells over 3 dram equ. or buy some low pressure RST loads and you will be ready to go. Would not hurt to have a competant gunsmith look at the barrels if you do not know what to look for.
To check for loose top or bottom ribs, apart from looking at them... Hang the barrels off your finger and knock at them in a few places with your nuckle. You should get a nice "ring" tone out of them. That tells you that everything is tight and "One" piece. If it sounds like more of a dull clang, then you have a rib loose.
The witworth steel was Parkers highest quality steel offered and was imported from Europe. So they are by all means up to snuff to todays standards on even cheap guns. That is if they are in good condition.
__________________
B. Dudley
|
Threaded Mode