Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
For my Parker 20 gauge target shooting, I use Win 572=14.5 grains, Remington STS hull 2 3/4 in, Ched 209(2000) primer, and a Claybuster CB1078-20(WAA 20) with a 7/8 oz lead load. The velocity is about 1120 fps with a pressure of about 9200 psi.
I what to reduce the pressure to below 9000 psi. Remington RXP20 and Down Range DRV 20 wads are no longer available.
What I am looking for is a wad that will result in a lower pressure.
20 Gauge Wads for lower pressures
Threaded Mode