Thinking about going Damascus

[Stepmac]

Originally Posted by CraigThompson

I have nothing against a person that doesn’t care to fire guns with Damascus or twist barrels that’s their prerogative , however on the other hand if I’m shooting them and someone doesn’t like it the best thing they can do is not stay around . I was shown an article from
The American Rifleman once that was written back in the late forties or early to mid fifties . If my memory serves P.O. Ackley wrote it . He took four Parker’s all with good bores , tight etc . Two were fluid steel and two were damascus . He started loading below factory standards trying same loads in all four working his way up to factory smokeless pressures . Then he started exceeding pressure velocity etc . He burst the two fluid steel barrels and went on with the two damascus guns until he thought he’d sprung the actions enough to make lock up not safe I think the article said . Anyway those guns I’m sure had far better bore condition barrels than a good many now .

Sherman Bell cheerfully over loaded damascus barrels trying to blow them up. He loaded a Parker GH to 30,000 psi and it kept on shooting. Now most modern loads are around 12,000 psi some more some less. RST I think is around 9,000 psi. 30,000 is WAY over what we normally run into. Bell even honed an LC Smith barrel to what he called "paper thin" and tried to get it to blow. It did not.