Resizing some "different" 8 gauge hulls

[Stan Hoover]

Originally Posted by Joe Plante

Guys,
Reading through a bunch of the different threads all you guys are discussing and figured you all might be the best resource to answer some of my questions or give me some advice.
I recently came into possession of a large cache (thousands) of Win 8 ga. Industrial loads (mostly #2, some 00, not sure what's the best thing to do with them. I'd like to salvage the lead, primers and powder out of them for my other reloading endeavors (casting for old Winchester 92's and shot pellet dripping, reloading 12 and 20 ga.) but I also don't want to waste the hulls for someone else that could make use of them. There's also the over-shot cards, fiber wads, sleeve hulls and the cup wads that are likely usable to someone.
I've set up a jig on a small craft saw to cut the roll crimp off the end of the hull trying to minimize the amount of loss but not sure if this the best approach. Any suggestions?

Help me out to make sure I don't commit blasphemy in the eyes of all the experts...

Joe,
you may want to hold onto them before taking them apart, I watched a box of 25 Winchester 8 gauge Industrial ammo sell this past Saturday for $650.

I have most of a case of Winchester Industrial ammo myself, my thought was to tear it down for the hulls, primer and buckshot that it is loaded with, but I'm rethinking that.

Stan