Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
I have only had five of my loads tested with the Cheddite CX2000 primers in 20ga 3/4oz Unique,12ga 3/4 oz Clay Dot, 12ga 1/8oz Red Dot,10ga 1 1/8oz Red Dot and 8ga 1 1/2oz Clays. I'm finding as a general rule I can reduce the powder by 1.5 gr to 2gr from published data (with WW 209 or Remy 209) and get very acceptable pressures and 1150fps. The smaller the gauge the more sensitive from my experience.
The Following 6 Users Say Thank You to Craig Larter For Your Post:
Threaded Mode