Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Hi Unregistered,
On July 29th, this site will be moving..! No, really - it's "moving" to another physical location - including servers, gateways, routers - everything - including my coffee cup...
So, from the date of July 29th through July 30 or 31 (shooting for these dates, but - as always, I'm at the mercy of my ISP who has to install the lines to the new location - and we actually get them running ;) ). But - this site, cloud servers and main web will be OFF LINE.
Now, please save these dates!! Please - don't be "that guy" who emails me on the 30th to tell me you "can't open the Parker Website". I'll already know it is offline - and also know that you are "that guy"...
I'll take this notice up and down over the next week or so - and leave it up during the final few days before shutting it off on the 29th..
0 Grade Lifter 10b 2 barrel set - missing a forend?
I have an 1877 0 grade lifter 10b s/n:9472 that came from the factory with a 32” barrel. At some point it had a 2nd 28” barrel made for it. Both barrels have the 9472 serial numbers on them.
Would it normally have come with a new 2nd forend as well? As the 32” barrel’s forend will not work with the 28” barrels. I unfortunately don’t have a 2nd forend for the 28” barrels. Both barrels lock up tight without the forend.
What are my options? Have a new forend made to fit out of an abandoned forend? Have a new forend made from scratch? Can the “lug” that a forend would attach to on the 28” barrel be cut and re-soldered to the proper place such that the 32” barrel’s forend would then work? Additionally can anyone decipher the notes for the 4 entries of this gun from the Parker log book? Thanks in advance!
Few pics to help tell the story, some with a tape measure:
The Following User Says Thank You to Ben Safryn For Your Post:
0 Grade Lifter 10b 2 barrel set - missing a forend?
Threaded Mode