Light load !

[Bruce Hering]

Originally Posted by Bill Jolliff

To get nice crimps for those 1/2 ounce loads using the CB 3/4 ounce pink wads (CB0175-12), I put a card board wad in the bottom before adding the shot. Those wads are 0.140" thick, 20 gauge diameter size. I get them from Craig Smith, Circle Fly wads in PA. They cost about a penny apiece purchased in quantity; ie 5,000.

Craig often goes to Ernie's shoot in June. Let him know and he will hand deliver them.

I use 14 grains of Alliant Extra Light powder and have had Tom Armbrust test them. Pressure around 5500 psi and the speed is around 1325 fps. Been loading them for 6 years.

Yep, that standard rule applies: put the shot in the right place.

Bill: Are these 2.5" or 2 3/4" shells ?

Thanks in advance