Quote:
Originally Posted by Daryl Corona
I've tried the 1/2oz. load in 12ga., first given to me by a friend, but could not get the crimp right. They worked well enough. Didn't feel like adjusting my machine but if this component shortage continues I may have to.
|
To get nice crimps for those 1/2 ounce loads using the CB 3/4 ounce pink wads (CB0175-12), I put a card board wad in the bottom before adding the shot. Those wads are 0.140" thick, 20 gauge diameter size. I get them from Craig Smith, Circle Fly wads in PA. They cost about a penny apiece purchased in quantity; ie 5,000.
Craig often goes to Ernie's shoot in June. Let him know and he will hand deliver them.
I use 14 grains of Alliant Extra Light powder and have had Tom Armbrust test them. Pressure around 5500 psi and the speed is around 1325 fps. Been loading them for 6 years.
Yep, that standard rule applies: put the shot in the right place.
Threaded Mode