Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
I made a pointed brass tip and used superglue to fasten it to the ball on the gauge. It allowed me to measure wall thickness in the pitting on a set of barrels. I found only 16 to 17 thou of wall left in the pits. Those barrels are tagged "Do Not Use". Good thing the gun has a second set of barrels which were fine. The brass tip was easily removed from the Manson gauge and saved for later use. The barrels await a new version of the Teague liners that I hope becomes available.
The Following User Says Thank You to George Stanton For Your Post:
Threaded Mode