Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
In my 2 1/2" 12 gauge guns I use a Cheddite hull & primer, 19.0 grains of Hodgdon International Clays, a Gualandi 1222 wad, 1 oz of shot with a 6 point star crimp at 1150 fps. Pressure should be around 7300 psi.
This load is my modification of a Hodgdon published load using 20.1 grains of International Clays, Gualandi 1225 was in a 2 3/4" Cheddite hull at 1235 fps @ 7700 psi.
Threaded Mode