Shellac touch up?
Hello new to the forum. I just purchased a Parker V 16 gauge made in 1908 that was restored sometime in the past and subsequently used as a shooter. Barrels sanded/polished and blued, receiver case colored, stock refinished with what I assumed to be some type of polyurethane based on its thickness and glossy finish. It has a vintage white line butt pad with the original “15” zip code. It has some scratches on the stock (1 deep one through the finish) and barrel scratches that looks like someone fell down with it or it fell out of a golf cart at the range. It was carried enough to wear off the lacquer and case colors off the bottom of the receiver so I figured it was restored between the 50s and 70s?
My problem: After reading though the forum I decided to darken the checkering on the stock to match the forearm. I cleaned the raw checkering with denatured alcohol and got some on the outlying wood resulting in the finish softening to a dull finish. I attempted to rub this out with a rag and discovered I removed the finish completely down to the wood in a small area. So now I assume the poly finish is actually shellac. Is it possible to touch this up and attempt to fill in the scratch and nicks without completely stripping and refinishing the stock? If so, can someone give me some pointers?
|
Threaded Mode