Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
I have the same problem with the same screw on my repro 16/20 set. I tightened it a couple of times & finally used some low strength Loctite to solve the issue.
Be sure if you use a thread locker to clean the screw & hole so it is grease/oil free. Then use very little Loctite, just a small drop off the head of a tooth pick is all that's needed on a screw like this. The biggest mistake people make with Loctite is they use too much of it & create a bigger problem than they are trying to solve.
The Following 2 Users Say Thank You to Paul Ehlers For Your Post:
Threaded Mode