More Short 10 loads

[J.B. Books]

Thanks for sharing the results of the testing with us. Both Green Dot and Unique are good powders for use in the short ten. Interestingly enough I have used 27 grains of GD with an SP10 with quarter inch of filler wad for 1 1/4 ounce lead loads in the Federal hull. I will update the short ten reloading data sheet with this info.

Originally Posted by Mark Garrett

Had a couple 2 7/8" 10ga loads tested by Tom Armburst

10ga Rem Hull cut to 2 7/8"
Win 209
24.5 gr Unique
Rem SP-10
Nickle Plated #1 Buck -16 stacked 2x2
26 grains PSB buffer + Tightseal on top
6 fold Crimp
1188 fps, ev 12 - 8666 psi ev 700

10ga Rem Hull cut to 2 7/8"
Win 209
27.0 gr Green Dot
(1) .125 NC 40lbs wad pressure + (2) 1/2" Fiber + (1) OSC ( all 10ga)
1 1/4 oz #7.5 lead
6 fold Crimp
1204 fps, ev 11 - 7233 psi ev 400