Quote:
Originally Posted by Mills Morrison
Thanks for all of the responses. This is mainly for my Damascus barreled guns and particularly the 10 gauges. 10 gauge RST is not cheap and I enjoy shooting the 10 gauge.
|
You can get the Mec Sizemaster for 10 gauge. You will need to order with this the short 10 kit (3 1/2 to 2 7/8) sold separately. It comes with a 2 oz shot charge bar so you will need to order the 1 1/4 oz. You should also get some extra powder bushings since it only comes with three when you buy it.
I bought the Mec Jig fixture mounted to an approx 18x18" piece of scrap plywood as a base then secured to the reloader. I did this for my 12 as well. I don't have a lot of space to permanently mount multiple reloaders. This way I can move which ever reloader to the work bench and fastened with C clamps or even on the kitchen table so I can watch football while I reload
Pete has a video how to shorten 3 1/2 Federals to 2 7/8. I'm sure he will chime in the link.
And make sure you get a good digital scale. You are going to need to weigh the powder charge since the bushings throw a lighter charge than the bushing chart states.
Here is a link how the Sizemaster works.
http://www.youtube.com/watch?v=EI5BKdSDRbE
Threaded Mode