Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Steve, Thanks, I ran a brass cleaning brush and some Hoppes #9 and a few cotton patches through it and the bores look really good. Some very light shallow pits just ahead of the chamber and two very small shallow dents in the left barrel that can be seen on the inside. I actually prefer to see a little roughness in the bores of an old gun because it means that its less likely anybody has honed the walls too thin. My plan is to leave the bores alone.
Threaded Mode