Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
My grade 0 underlifter S/N 8036 has chambers (3") that measure .810 as best I can measure with small digital calipers. The bore diameters are .744 and .746. I'm sure the chambers, forcing cones, and chokes have been messed with. The bore diameters are consistant from about 6" from breach to the start of the choke.
What do I have?
Also, my 12ga TL S/N 27356 have chamber diameters of .810 and bores of .758. These are consistant with Austin's plot.
Threaded Mode