Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Go to your picture 267, that shows the serial number on the receiver. On the front of the receiver there is a rounded area , cut a piece of the thinnest shim material out of the thinest piece of feeler gauge and put over the rounded area and then put the barrels back on . This will end your barrel shake for the cost of the feeler gauge, about $7.00
Every time you take the barrels off, you have to watch out about it falling out.
Threaded Mode