Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
If you pull the bolt that holds the mast in place, and lower the press 1/4", you will see there is room to drill and tap and new hole in the mast. This will lower the whole machine, and still allow adjustment back to 2 3/4" or 3". You will have to re-adjust the drop tubes.
I have a 650 with this done to it, and it works perfectly.
Threaded Mode