[QUOTE=Pete Lester;155511]
Quote:
Originally Posted by scott kittredge
What are the component combinations? I was looking at the IMR reloading center and they have 3/4 and 1 ounce loads in 12ga but no 7/8 loadings which is really weird. All the 3/4 ounce loads with 700-X with AA hull in 12ga were 7700 psi and up.
|
dupont hand loaders guide
AA hull
1 oz lead shot
rem 209p primer
16 grs 700-x
cb110012 wad
1110 fps at 5000 psi
there are 7/8ths oz loads in same book at 4600 psi
this is way i like 700-x so much
load from 20 ga. to 10 ga.
low pressers
small amounts of powder to loads
and VERY CLEAN burning
Threaded Mode