Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
You just need to re cock the hammers. There is a special tool that can be purchased for this job. But I have always just used a flat head screw driver. The first one is easier I coco this way than the second, but you can do it without too much trouble. Put it In between the cocking came and lift up on one using the other as the leverage point. Lift up until the hammer clicks as cocked. Then repeat for the other side.