Re-done hammer gun barrels and a high condition old hammer Parker.
No gunsmith will certify that your barrels are safe to shoot. One might state that he sees no bad conditions with the gun. The best you can do is to get the dents removed, and have the barrels measured for wall thickness, at least .025 and most of these old Parkers were .035 or greater. No cracks, pin holes, etc. Lots of people shoot these guns with RST shells.
Good barrel refinisher at 816 444 2040.
The California Side by Side Society is active, the pres lives around Livermore, and members regularly shoot these old gun, including hammer Parkers.
Last edited by Bruce Day; 01-02-2010 at 09:25 AM..
|
Threaded Mode