SC on Guns International

[winplumber]

Gun #103082893 There is a Screw and a locking screw on the right side up at the top of the frame something I haven't noticed on others unless I'm overlooking it What's its purpose?

[Pa SxS]

A very early SBT. The early guns had a separate firing pin unlike the SxS's. This is the access to the firing pin. Later versions had the integral hammer and firing nose as 1 piece. S/N is in the 17x,xxx range.

[Bill Murphy]

A very pretty SC, with a Del Grego forend and maybe the stock also. A few screws misaligned but the firing pin access screw looks pretty good. A little overpriced, but generally a nice gun.

[Stepmac]

Originally Posted by Chuck Bishop

A very early SBT. The early guns had a separate firing pin unlike the SxS's. This is the access to the firing pin. Later versions had the integral hammer and firing nose as 1 piece. S/N is in the 17x,xxx range.

My SBT SC has that screw on the top of the right side of the receiver. I cannot recall if I looked up the date of my SBT or not. I've been sick, you see. It is wonderful to be alive.

[6pt-Sika]

Originally Posted by Steve McCarty

My SBT SC has that screw on the top of the right side of the receiver. I cannot recall if I looked up the date of my SBT or not. I've been sick, you see. It is wonderful to be alive.

What’s engraved on the floor plate ? All scroll were the earlier ones and the later ones had a pigeon on the floor plate .