![]() |
![]() |
![]() |
|||||||||||||||||||||||||||||||||||||||
|
![]() |
![]() |
![]() |
#3 | ||||||
|
![]()
I like the gun. I don"t like the DAH.
Fair asking. Bob Jurewicz |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following 3 Users Say Thank You to Bob Jurewicz For Your Post: |
![]() |
![]() |
![]() |
#4 | ||||||
|
![]()
I've never had any luck trying to talk them down on there prices.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following 2 Users Say Thank You to Ken Descovich For Your Post: |
![]() |
![]() |
![]() |
#5 | ||||||
|
![]()
Book shows it was 28" from Parker, but I question that the chokes may have been opened. A letter may tell you what it left the factory with as far as chokes. If opened, wall thickness is a critical point since going from modified or full to open chokes may explain dents? He doesn't tell you which choke is for which barrel so if it is reversed chokes with IC right and cylinder left, beware.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following 2 Users Say Thank You to Jerry Harlow For Your Post: |
![]() |
![]() |
![]() |
#6 | ||||||
|
![]()
I think it a very nice gun with a fair price. It has a three day inspection so bring it in and measure the walls chokes etc. If I was a 16ga guy I would be all over it as a hunting gun.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following 3 Users Say Thank You to Craig Larter For Your Post: |
![]() |
![]() |
![]() |
#7 | ||||||
|
![]()
Only about one in a thousand gun sellers and maybe one in three hundred gunsmiths own a wall thickness gauge. So, you have to deal only with sellers who offer an inspection, and own your own wall thickness gauge. Same deal with a bore micrometer, except the number of these guys who own bore micrometers is about twice the wall thickness gauge ratio.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following 4 Users Say Thank You to Bill Murphy For Your Post: |
![]() |
![]() |
![]() |
#8 | ||||||
|
![]()
Looks like a very honest gun to me. I like everything that I see.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to Gerald McPherson For Your Post: |
![]() |
![]() |
![]() |
#9 | |||||||
|
![]() Quote:
![]() ![]() ![]() ![]() ![]() ![]()
__________________
Wag more- Bark less. |
|||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to Daryl Corona For Your Post: |
![]() |
![]() |
![]() |
#10 | |||||||
|
![]() Quote:
yesterday I observed multiple guys using Damascus barreled guns, all seemed to be fine. I used 3 different guns, Twist barrels, Stub twist barrels, and Parker Laminated barrels, all worked seamlessly when I pointed them correctly. Oh, and may I add, they were attractive to look at, much more so than plain blued fluid steel barrels. I don't feel you will be convincing many of the gentlemen reading your posts that Damascus barrels are dangerous ![]() |
|||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following 11 Users Say Thank You to Stan Hoover For Your Post: |
![]() |
|
|