|
 |
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
 |
11-26-2023, 08:59 AM
|
#3 | ||||||
|
The bolsters would say it's a Grade 3, but I can't see enough of the locks.
The frame size will be stamped on the bottom of the rear barrel lug. I had a 1 frame grade 3 in beautiful condition and it was a joy to shoot. Another member here has it now. |
||||||
|
|
||||||
 |
 |
 |
| The Following User Says Thank You to edgarspencer For Your Post: |
|
|
|
11-26-2023, 09:22 AM
|
#4 | ||||||
|
Yes, it’s a Grade 3and the rest of the engraving and hammers is indicative of the grade as well.looks like a candidate for a restoration as long as the barrel walls are sufficiently thick to safely shoot it.
.
__________________
"I'm a Setter man. Not because I think they're better than the other breeds, but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture." George King, "That's Ruff", 2010 - a timeless classic. |
||||||
|
|
||||||
|
|
|
| The Following 4 Users Say Thank You to Dean Romig For Your Post: |
|
|
|
11-26-2023, 01:05 PM
|
#5 | ||||||
|
So it is a 12Gauge? I wasnt sure, I thought it could possibly be a 10 gauge. But thats why I am here
|
||||||
|
|
|
||||||
|
|
|
|
more pics if ity helps | |
|
11-26-2023, 01:07 PM
|
#6 | ||||||
|
more pics if ity helps
Here some more pics
|
||||||
|
|
|
||||||
|
|
|
|
|
|
11-26-2023, 01:42 PM
|
#7 | ||||||
|
Ryan, cant tell from pics if it is a 12 or 10.
__________________
"How kind it is that most of us will never know when we have fired our last shot"--Nash Buckingham |
||||||
|
|
|
||||||
|
|
|
|
|
|
11-26-2023, 01:46 PM
|
#8 | ||||||
|
Ryan
The serialization book shows that serial number to be a 10 gauge with 32” Damascus barrels, no extras, pistol grip stock, and it is a Grade 3, |
||||||
|
|
|
||||||
|
|
|
| The Following 2 Users Say Thank You to Stan Hoover For Your Post: |
|
|
|
11-26-2023, 02:03 PM
|
#9 | ||||||
|
How much would it cost me in your opinion...rough guess.....to have this gun restored? And would it be worth it? Or just keep as is for a family momento?
|
||||||
|
|
|
||||||
|
|
|
|
|
|
11-26-2023, 02:40 PM
|
#10 | ||||||
|
First off, for a restoration, if the bores and barrel wall thickness are good, that stock would need to be replaced. Usually a stock replacement will start around $2K. If you're going that route might as well have it made to your dimensions. Action can be cleaned up inside and out. There are guys who specialize in re-bluing the barrels. Damascus can clean up and cold blue to a gorgeous pattern. Breck Gorman is one guy I would recommend for those barrels. Nice gun. The grade 3 may be the difference between a full restore and selling it for parts. If the barrels are too pitted then Briley could fit a set of full-length tubes to those specific barrels and you could convert it to a 16g or 20g easily.
|
||||||
|
|
|
||||||
|
|
|
| The Following User Says Thank You to Mike Koneski For Your Post: |
 |
|
|
Linear Mode
