|
09-28-2016, 04:19 PM | #3 | ||||||
|
Before restoration $1200. After restoration $1200.
Restoring a common field grade gun is losing proposition in my opinion. If you are not happy with the vhe , sell it and look for a high condition example you will be way ahead in the long run. |
||||||
The Following 8 Users Say Thank You to Craig Larter For Your Post: |
09-28-2016, 10:25 PM | #4 | ||||||
|
Have you tried steaming out the gouges? If not soak a clean cloth in water, lay it on the dents/gouges and apply heat, the wife's steam iron will work but don't get caught ( I speak from experience) two or three applications should start raising the dents. You can usually fill any remaining scratches by sanding in a good oil finish.
|
||||||
The Following User Says Thank You to Steve Havener For Your Post: |
09-28-2016, 10:51 PM | #5 | ||||||
|
If the wood grain is broken, steaming will not do much.
It will have an effect on shallow dents.
__________________
B. Dudley |
||||||
09-29-2016, 08:37 AM | #6 | ||||||
|
Thanks. That's what I thought. It's my rainy day gun in addition to being a backup, so it wouldn't make sense to try to make it into a silk purse. By the way, RST spreader loads in the right barrel work well for close shots.
|
||||||
09-29-2016, 08:45 AM | #7 | ||||||
|
Barrel blue is one thing if it needs it. But i would not recommend case color work on the gun if the wood cannot be made to look like new. Especially on a gun that is going to be used a lot.
__________________
B. Dudley |
||||||
10-09-2016, 02:03 PM | #8 | ||||||
|
Allan,
It is hard to determine whether your VHE warrants a restoration. Photos are always helpful in that regard. Last year I purchased a VHE at auction on GB for around $900. The finishes were worn and the forend wood was cracked and chipped, requiring some glass work. I restored the case colors, stocks, and bluing. Had I done that work for a client, the cost would have been around $800. I am keeping that VHE as my new pheasant gun, but if I were to sell it, I believe it would bring close to $2,000 at auction. So while there might not be a lot of quick profit in having a restoration done, in most cases the increase in the gun's value will cover the costs. Others will say that they would rather have a gun with no finishes left than one that has been restored, and that's fine too. To each his own. The bottom line is that its your gun and you shouldn't let anyone tell you what to do with it. Do whatever brings you the most pleasure when you handle and shoot it. The current home page cover photo is a PH grade that I restored this spring. WWW.CLASSICCASECOLORSLLC.COM |
||||||
|
|