Parker VH 242242

[Sieg]

Originally Posted by Brian Dudley

Another thing I notice is that your gun does not have the 1pc. Forend loop which would be standard fare to be used with a Beavertail forend. But... Your forend iron is correct for a Beavertail with the drawbolt.

Originally Posted by Dave Noreen

Look again. Yes it does!!

Great example of a late Remington gun with some options.

I am not familiar with what a 1pc. forend loop is, could someone please clarify?

If there's better pictures I can supply let me know.

Thanks

[George M. Purtill Member #28]

Originally Posted by Dave Noreen

Look again. Yes it does!!

Great example of a late Remington gun with some options.

yup Agreed
It's had to see at the angle of the picture but the tell tale curve on the breech side is there.

[Pa SxS]

Scott,

We unfortunately have no information on your gun. I would be interested in the frame size of your gun. It's possible it's on a size 1/2 frame. Remington started using the 1/2 frame size in the mid 30's. This frame size is relatively rare because it's almost as small as a frame size commonly used on the 20ga. guns. Look on the bottom of the rear lug on the barrels. There should be a number stamped on the flat. It could be a 3, 2, 1 1/2, 1, or 1/2.

The Morgan adjustable pad was very popular with target shooters in the 70's and I believe it's still sold today. That said, they look terrible on a vintage gun. You could keep the Morgan and put it on when you need to shoot the gun but have a vintage correct pad fitted such as a repro Silvers or Hawkins pad when displaying the gun. A 1" pad would make the LOP perfect.

Nice gun!

[B. Dudley]

Originally Posted by Dave Noreen

Look again. Yes it does!!

Great example of a late Remington gun with some options.

Ah yes! I was looking at the one photo showing the front of the loop. This making us look like a standard loop. My mistake. Thanks.

[Dean Romig]

It is easiest to see the one-piece forend lug in the picture seventh from the last. It's a bit out of focus but unmistakable that it is the one-piece lug.

[Sieg]

Originally Posted by Chuck Bishop

Scott,

We unfortunately have no information on your gun. I would be interested in the frame size of your gun. It's possible it's on a size 1/2 frame. Remington started using the 1/2 frame size in the mid 30's. This frame size is relatively rare because it's almost as small as a frame size commonly used on the 20ga. guns. Look on the bottom of the rear lug on the barrels. There should be a number stamped on the flat. It could be a 3, 2, 1 1/2, 1, or 1/2.

The Morgan adjustable pad was very popular with target shooters in the 70's and I believe it's still sold today. That said, they look terrible on a vintage gun. You could keep the Morgan and put it on when you need to shoot the gun but have a vintage correct pad fitted such as a repro Silvers or Hawkins pad when displaying the gun. A 1" pad would make the LOP perfect.

Nice gun!

Chuck,

Thanks for looking and the compliment. The frame is a 1-1/2 with 30" barrels both full choke.

I gave Roy Marcot the info on the gun today, if there are records I'm betting he'll know. http://www.remingtonsociety.com/rsa/research/

Thanks for the input on the pads, I agree on the looks, functionally low comb guns beat me up even with field loads. Probably related to how I shoulder a gun due to past shoulder separations and broken collar bone.

[B. Dudley]

The Remington Society will likely be of little help to you.

You are in the right place for information right HERE. And if we do t have them, that means the records essentially do not exist.

[Sieg]

Originally Posted by Brian Dudley

The Remington Society will likely be of little help to you.

You are in the right place for information right HERE. And if we don't have them, that means the records essentially do not exist.

I agree Brian, but since I had the connection I figured it was worth a shot.

[Bill Zachow]

Seig, you might check with Lawrence DelGrego in Illion. When I owned a VHE 28 gauge, Larry's shop had some typed information on very late, Remington produced guns. His dad showed me the information but I can no longer remember any of it. His grandfather got the information from Remington when he took over the repairs for Parkers and bought parts and tooling from Remington.

[Bill Zachow]

Seig, forgot to mention, my 28 was in the same age ballpark as your gun, 242103.