Anyone used the Galazan CSM Parker Bros. original Stock Finish or French Polish?

King Cobb · 07-23-2014, 04:14 PM

Just curious as I haven't done this before if it would be better to order one of those bottles rather then mix it up myself?

Was curious if anyone had any experience with them?

Gary Cripps · 07-23-2014, 08:09 PM

A little over a year ago I had a G grade 20 ga. with spotty and worn wood. I found the recipe for French polish-I think here. I cleaned the stock off with alcohol, mixed up the ingredients and started. A very small amount is used at each coating. At five coats it started to take on a nice depth an shine. I stopped at seven coats. More would have given even better depth. After a drying period I put on a coat of Johnson's paste wax. Don't know if it was needed but I like to shoot that 20 and do it in all kinds of weather.

Phil C · 07-23-2014, 09:40 PM

I have used the French Polish from Galazan. It works very well. A piece of old tee shirt, a cotton ball, and a rubber band to make a small pad for French polishing, works great. You need some alcohol and oil. I used some olive oil and some Everclear it worked great.

King Cobb · 07-23-2014, 10:02 PM

Does it come with any instructions or directions?