stock off NID

[10 bore]

hi, help, how does one remove the stock from the receiver on an Ithaca NID?? thanks scott

[Dean Romig]

Why not ask over on the NID forum?

[10 bore]

Originally Posted by Dean Romig

Why not ask over on the NID forum?

Dean, I tried to get on there forum and it wouldn't let me do it. someone here will know, they know everything here. scott

[winplumber]

Go outside to the big tree grab by the muzzle swing like hell at the tree that should do it. Im sorry I needed a laugh today !

[10 bore]

Originally Posted by Steve Huffman

Go outside to the big tree grab by the muzzle swing like hell at the tree that should do it. Im sorry I needed a laugh today !

there has to be a better way

[J.B. Books]

Directions for Ithaca NID take down here:

http://www.shotgunworld.com/bbs/view...137931&start=0

[Bob Jurewicz]

Scott,
I've taken them down in the past and don't remember any fancy tricks.
Trigger guard screw.
Top and bottom tang screws.
Trigger plate screws.
I think that's it.
Bob Jurewicz

[David Lien]

Do. Not Loose the small spring under the floor plate, that holds the top lever over. It rests in a small hole just under the floor plate.If you turn the action over it will just fall out...
David

[B. Dudley]

They come apart very similar to a Fox and or any other Ithaca flues. The actions are kind of a meld of both designs.

[10 bore]

Originally Posted by Brian Dudley

They come apart very similar to a Fox and or any other Ithaca flues. The actions are kind of a meld of both designs.

Thanks Brian, that's why you will be working on it, I have never been into a Fox or Ithaca, scott