Getting back to reloading

[Mike of the Mountain]

Now that’s just funny!!

[Andy]

I am very funny in case you didn’t know

[Eric Johanen]

I use the American Select load Andy referenced except use 18.5 grains. Very good in the 2.5 length hull. All my vintage guns handle it quite well. A friend who is a bit recoil shy drops to 17.5 and it works equally well on clays. Cheditte hulls and a Z 21 Trap Commander wad in the straight walled hulls.

[Cold Spring]

Originally Posted by Mike Koneski

But Andy's shells have holes in the patterns!!

I presume Andy's shells go off all the time whereas a couple of witnesses can testify to 5 of about 36 shells loaded on a Spolar with no powder. Might want to turn off Pandora and quit jiving while loading. Just sayin

[Bill Murphy]

I thought the Spolar came complete with an attendant to insure everything goes right.

[Andy]

Originally Posted by Frank Srebro

I presume Andy's shells go off all the time whereas a couple of witnesses can testify to 5 of about 36 shells loaded on a Spolar with no powder. Might want to turn off Pandora and quit jiving while loading. Just sayin

Mine do go off all the time Frank!!! They just go off in the wrong direction somehow : )

[Mike of the Mountain]

Originally Posted by Frank Srebro

I presume Andy's shells go off all the time whereas a couple of witnesses can testify to 5 of about 36 shells loaded on a Spolar with no powder. Might want to turn off Pandora and quit jiving while loading. Just sayin

Always works better when you don’t bump the powder hopper off the charge bar!!

[Mike of the Mountain]

Originally Posted by Andrew Sacco

I am very funny in case you didn’t know

Do you mean funny “Ha-Ha” or funny “peculiar”?

[Andy]

Originally Posted by Mike Koneski

Do you mean funny “Ha-Ha” or funny “peculiar”?

You've met me Mike, you know the answer

[Don Mills]

Well after a decade in a box got the loader set up on a new bench. Whole lot of rearranging to get the bench built. After looking at the Allianz and Hodgon sites I am going to try Andy’s and Randy’s suggested loads. I have some Remington shells, wads and a 7/8 ounce bar on the way. I am getting some win 209 primers from Dad. I would like to get a lb of American select powder and a pound of clays powder as well some rem 209p primers. I have scoured the online shops to no avail. Anyone have any idea where else to look? Hoping that the wait for powder and primers isn’t measured in months.