2 Frame 10 gauges

[PML]

I recently found a 2 frame EH 10 gauge with 30" Damascus barrels. The gun was made in 1904 and has a pistol grip stock and appears to have the hickory reinforcing rods. The gun is complete except for the missing buttplate. It only weights 7.44 pounds!!

1. How common are 2 frame 10's?

2. If you have one how much does yours weigh and what is the barrel length?

3. What timeframe did Parker use the Hickory rods?

Thanks

Patrick

[10 bore]

i have a 2 frame EH with 30 in. barrels made in 1889 that is 8 3/4 lbs, choked .025 in each side. it is my avatar pic next to the fat mallard. i love mine scott

[Bill Murphy]

#2 frame EH grade Damascus tens are pretty common. I have one with 28" barrels that weighs about what yours does. My #2 frame 27" Damascus DH ten weighs about 7 1/4 pounds. They were obviously ordered as bird guns. I have never seen a #2 frame fluid steel ten gauge Parker. DH ten #71767 was made on a #1 frame with 26" barrels, but I don't know the ordered or completed weight. Maybe Mark would look it up for us and post the order book and stock book weights of that unusual gun. This gun, #71767, may actually weigh under seven pounds.

[Bill Murphy]

Concerning the hickory rod, consider that any Parker could be a restock with the rod. A PGCA letter may shed light on whether the gun has been restocked.

[PML]

Originally Posted by Bill Murphy

Concerning the hickory rod, consider that any Parker could be a restock with the rod. A PGCA letter may shed light on whether the gun has been restocked.

It is not a restock. It is just an old brown gun that has seen alot of use. I should have weighed it before I cleaned it up, It may have been closer to 8lbs with all the crud that it was holding. Thanks for the info Bill.

Patrick

[Bruce Day]

CH 10/26" . Photos on request.

[Bruce Day]

No letter.

J B Stevens Jr
Dover, NH

1-12/30 Bernard PG 9 1/2 2 3/4x1 3/4-14
65557
???? 10/26 bbls 7 3/4 cyl

Target wood powder & make ????????



Stevens was semi well known.

I've never been able to figure out the words where I put the ?????'s.

[PML]

Originally Posted by Bruce Day

I've never been able to figure out the words where I put the ?????'s.

How many forend's does the gun have? If only one then perhaps it says;

"Forget wood problem & make his forend do" ?

Just my guess.

Patrick

[Richard Flanders]

I'd love to see pics of the 26" CH10. I'd love to have a light 10ga also. I'm afraid everything else might go unused if I had one. What a perfect pheasant gun.

[Bruce Day]

cccc