![]() |
![]() |
![]() |
||||||||||||||||||||||||||||||||||||||||
|
![]() |
16/20 event | ![]() |
![]() |
#3 | ||||||
|
![]()
Thanks John, That is all I needed to know...for now anyway Jim
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
new 16/20ga event @ Southern | ![]() |
![]() |
#4 | ||||||
|
![]()
John, since the reproduction Parkers are allowable in the new event I finally found and acquired a 2 bbl set to shoot in said event. I promise I will practice enough that I won't embarrass the Parker team. I also have a new set of eyes...lense emplant in both eyes and I am reading on the 20/15 line of the eye chart! I won't be able to make Rick's shoot in SC but I'll see you in Sanford in April 2018. Jim Garrett
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following 2 Users Say Thank You to jim garrett For Your Post: |
![]() |
![]() |
![]() |
#5 | ||||||
|
![]()
a point of clarification. There are two Southerns, both run by Rick Hemmingway and Bill Kempher . If I am correct this event is only at the Spring Southern not the upcoming Fall Southern at the end of October.
David |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#6 | ||||||
|
![]()
I know it sounds like sacrilege but could you shoot a 12 ga Parker with 20 gage Briley tubes if that is all one has ? A purest I am not but do respect the purist in their pursuit of originality. My Parker has very pitted barrels I do want to keep it original a Hammer #2 top break made in 1885. So it is the most affordable way to enjoy the gun and still not molest it for me to shoot it.
Buddy Walters |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#7 | ||||||
|
![]()
John
The event rules do not allow you to shoot a 12ga gun with inserts in any subgage event. You could shoot it in any of the open events or in any 12 ga event though. I would love to see you come , meet the Parker crew, and enjoy your gun. David |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to David Dwyer For Your Post: |
![]() |
![]() |
![]() |
#8 | ||||||
|
![]()
John
A suggestion is to locate a replacement barrel for your gun. I do no think that would be difficult or prohibitive expencive. Try Dave Fjelline, Tom Carter or Brian Dudley. I purchased one for a lifter from Brian for $350? David |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to David Dwyer For Your Post: |
![]() |
![]() |
![]() |
#9 | ||||||
|
![]()
What if I find a 12g Parker with bad bores and have Briley install a set of permanent 20g tubes? That would keep an old warhorse in the game? Would that work for the Challenge event?
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#10 | ||||||
|
![]()
The challenge event is an open gage event. I shoot it with a D grade 20ga hammer gun so I do not see a any issue
David |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
|