AAHE Parker

[Mike Murphy]

I assume that some members on this board know the history of this AAHE Parker. It certainly is an attractive piece.

https://www.gunsamerica.com//9147177...RRELS.htm?wl=1

[Fishtail]

I'm sure some do but most don't.

Nice gun, for sure....but I'm curious how the dealer knows the butt is a 'factory' Silvers pad. It looks way too new...plus even if it is a replacement, how does he know the gun came with a pad when no factory records exist? I'd be far more enthralled to see a SSBP.

[Researcher]

Why is the trigger plate extending so far below the bottom line of the stock -- pictures 185 and 186?

[B. Dudley]

Originally Posted by Dave Noreen

Why is the trigger plate extending so far below the bottom line of the stock -- pictures 185 and 186?

Because the stock is either from another gun or was damaged/oversanded in refinishing. Both sides of the trigger plate are showing. Big time on the right side and the sides of the upper tang are showing too.

The gun has been recolored with Cyanide process coloring. There is so much of the trigger plate tang showing that you can see the striping! The wood has at least been refinished and the checkering recut. Pattern is incorrect in a couple places. Especially around the upper tang. And the checkering is a little too course for the grade.

I doubt the gun originally had a pad. Maybe. But it looks like this stock in particular had an SSBP given the look of the heel where the pad meets it.

The BTFE may not be original either. The shape of it looks not so correct to me. I doubt that Parker would have done full cover checkering like that on a BTFE. There is no photo of the end of it or the inside of the forend to confirm if it is actually a BTFE iron or not.

A lot of issues with this gun for the asking price...

[G. Wells]

Any explanation for .025 and.021 barrel wall thickness? Surely that's not original on a live bird gun is it?

[Bob beach]

This Parker was a consigned gun at Von Lengerke & Detmold near the end on 1924. You could have bought it for $400.00.

Bob Beach

Archivist
Griffin & Howe, Inc.

http://griffinhowe.com/research-2/

[todd allen]

Originally Posted by Michael Murphy

I assume that some members on this board know the history of this AAHE Parker. It certainly is an attractive piece.

https://www.gunsamerica.com//9147177...RRELS.htm?wl=1

That is an absolutely gorgeous gun! If I were younger, and still competitive as a shooter, I would love to have that one in my arsenal!

[Dean Romig]

The presence of Remington repair codes would help to explain a few things about this gun to me.

Does anyone know if there are such Remington codes on the barrel flats?....Jay?





.

[George M. Purtill Member #28]

Very pretty but its not right.
It's hard to fathom a AAHE being beat up enough to need re-case coloring. Why do that? That's just my feeling.

[Dean Romig]

Originally Posted by George M. Purtill

Very pretty but its not right.
It's hard to fathom a AAHE being beat up enough to need re-case coloring. Why do that? That's just my feeling.

I once examined an AAHE that was so badly rusted and pitted on the exterrior that most people would have considered it to be worth not much more than a parts gun. The complete restoration was put into the able hands of Dan Cullity. After his work was finished it was nearly impossible to to find a flaw that would indicate it had been entirely restored and re-engraved perfectly. I did find one flaw and I can say that the subject AAHE of this thread is not that gun.






.