Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Non-Parker Specific & General Discussions Shotgun Shell Reloading

Notices

Reply
 
Thread Tools Display Modes
Tungsten Super Shot will eliminate the need for a big bore
Unread 03-31-2018, 09:52 PM   #1
Member
J. A. EARLY
PGCA Member
 
Jerry Harlow's Avatar

Member Info
 
Join Date: Nov 2010
Posts: 2,018
Thanks: 4,214
Thanked 2,821 Times in 914 Posts

Default Tungsten Super Shot will eliminate the need for a big bore

I finally had the chance to pattern and test my Tungsten Super Shot hand loads today. There is no doubt that any double I have in 12 down to 20 will kill a turkey dead at 40 plus yards with these number 9s.

The first gun I tried was my late Uncle’s 20 gauge Franchi 48-AL. Two weeks ago I found a vent rib barrel for the gun with a screw in full choke (.030) to replace my uncle’s I.C. plain barrel with which he killed hundreds of quail. The pattern was fantastic at forty yards with the full choke.

I next tried the same one ounce #9 loads in my most tightly choked 20 double, a Fox Sterlingworth with .034 in the left barrel. Although at forty yards the pattern was to the right of the target, there were more than enough shot in the turkey to kill him dead.

Next I tried my 1 ¼ ounce 12 gauge loads in my most tightly choked Parker, a VHE with .040 in the left barrel. Again, no turkey could live through the #9s. The Tungsten 9s have the same penetration at 70 yards as lead 9s do at 15 yards, and the same penetration as number 5s at 57 yards according to the chart. This gun also patterned to the right, and I had the guns on target in a Caldwell Lead-Sled. These pure tungsten pellets not only went through heavy paper and two thick layers of carpet runner. The pellets left their imprints in 1/16 inch solid steel. I made a trap to recover my shot (pictured) and of the three shells with 3 ¼ ounces of shot fired, I recovered 95% of it. Undamaged I might add. Very important at $3 an ounce. I hope to kill one spring gobbler with my late Uncle’s gun, one with the 12 VHE, and lastly with a 20 either in Fox or Parker. I am sure these pellets will kill out to 50 yards, but I can’t see that far anymore to know I'm on a turkey's head with a simple metal bead.

The last photo is what 1 ounce of #9s from a 20 gauge will do at 40 yards.

Finally there is no worry about damage to vintage barrels as in the 20s the shot is inside a 28 gauge shot cup inside a 20 gauge wad, and the 12s have a mylar wrap inside the 12 gauge shot cup.
Attached Images
File Type: jpg 20180331_164309 rotated.jpg (518.8 KB, 9 views)
File Type: jpg 20180331_170719 resized.jpg (519.0 KB, 27 views)
File Type: jpg 20180331_170731.jpg (511.2 KB, 19 views)
File Type: jpg 20180331_170741.jpg (505.5 KB, 23 views)
File Type: jpg 20180331_171018 rotated.jpg (506.8 KB, 12 views)
Jerry Harlow is offline   Reply With Quote
The Following 7 Users Say Thank You to Jerry Harlow For Your Post:
Unread 04-01-2018, 06:06 AM   #2
Member
Opening Day
PGCA Lifetime
Member

Member Info
 
Join Date: Nov 2008
Posts: 3,900
Thanks: 11,172
Thanked 2,093 Times in 1,197 Posts

Default

Jerry, I haven't heard of this shot (TM tungsten yes) but what is Super Shot Tungsten and where do you get it?
Eric Eis is offline   Reply With Quote
Unread 04-01-2018, 10:37 AM   #3
Member
J. A. EARLY
PGCA Member
 
Jerry Harlow's Avatar

Member Info
 
Join Date: Nov 2010
Posts: 2,018
Thanks: 4,214
Thanked 2,821 Times in 914 Posts

Default

Eric,

Here is the web site. Hal on the site sells it. He has multiple loads that he has developed. But he asks that when you buy from him and he shares the loads with you, that you don't share with anyone and I respect that. A pound costs $47 and #9s are all you need for turkeys and #7s for geese. The penetration is remarkable, as I could not believe the #9 would leave its imprint in steel at 40 yards. My only complaint is that no load uses common wads and they are available at Ballistic Products. But I doubt I'll ever shoot all 250 wads in my lifetime, and I had to buy both 20s and 12s.

They are killing turkeys with 28s and .410s at 40 yards.

https://www.tungstensupershots.com/

Here is a chart that shows 1.5 inch penetration with 9s into gelatin at 70 yards the same as lead 9s at 15 yards!

I see the shot is now $53/pound. Tariffs taking effect. I guess I'll have to operate on any turkey I kill to recover the shot from him.

http://www.trapshooters.com/threads/...sities.267784/

There are examples of the shot traps on there. Mine cost me $35 and scrap wood from a concrete project, and yesterday with three shots I recovered $9 worth of shot. Unless you don't mind throwing $3 an ounce away to test, the trap should be made before shooting these. That's what took me the longest, waiting to build the trap. They do caution that this stuff will kill so far that one has to be careful with your backdrop. I had flyers that went around the trap I am sure. Like a dummy, I made a holder for a roll of construction paper like one buys at Lowes and had it above the trap so I could roll it down and staple over the trap. Well the first shot filled it with holes, and it appears many layers deep into the roll. Powerful stuff.

Last edited by Jerry Harlow; 04-01-2018 at 10:44 AM.. Reason: Current price of shot.
Jerry Harlow is offline   Reply With Quote
Unread 04-01-2018, 11:03 AM   #4
Member
Phil C
PGCA Member
 
Phillip Carr's Avatar

Member Info
 
Join Date: May 2009
Posts: 3,267
Thanks: 3,658
Thanked 6,154 Times in 1,491 Posts

Default

It looks like Federal loads these but looking on line they are all sold out where ever I. Checked. Hand loading may be the only way to go at this point in time.
Phillip Carr is online now   Reply With Quote
Unread 04-01-2018, 11:04 AM   #5
Member
charlie cleveland
Forum Associate

Member Info
 
Join Date: Jul 2009
Posts: 12,986
Thanks: 0
Thanked 7,803 Times in 3,968 Posts

Default

j a this sounds like a turkey hunters dream...maybe the price will drop as the shot becomes more known...i m ready for you to take a big gobbler with it....my hunting has been slow only been 1 time been to cold in the mornings for me....charlie
charlie cleveland is offline   Reply With Quote
Unread 04-01-2018, 11:39 AM   #6
Member
StubTwist
PGCA Member
 
Frank Cronin's Avatar

Member Info
 
Join Date: Jan 2010
Posts: 979
Thanks: 6,273
Thanked 1,608 Times in 484 Posts

Default

When you pattern the gun with lead, does it also pattern to the right or just the Tungsten Super loads? If so, any idea why?
Frank Cronin is offline   Reply With Quote
Unread 04-01-2018, 02:48 PM   #7
Member
J. A. EARLY
PGCA Member
 
Jerry Harlow's Avatar

Member Info
 
Join Date: Nov 2010
Posts: 2,018
Thanks: 4,214
Thanked 2,821 Times in 914 Posts

Default

Quote:
Originally Posted by Frank Cronin View Post
When you pattern the gun with lead, does it also pattern to the right or just the Tungsten Super loads? If so, any idea why?
I believe one would find the barrels regulated to a shorter distance. I am guessing they would be right on at 35 yards. I have a L.C. Smith that would win any shooting match one took it to with the left barrel. But at the 30 yard turkey shoot distance one had to shoot at the top right hand corner of the target to center the pattern. It would be right on at 40 yards.

The extra full chokes in the 12 VHE and 20 SW I believe in this case are working against me. But that is why one patterns guns, to see where they shoot. Of course I could also have pulled to the right. But I don't think so. I squeezed the triggers like a rifle shot from the Lead Sled.

With the Franchi and a single barrel with a rib parallel to the center of the bore, the pattern was dead center.
Jerry Harlow is offline   Reply With Quote
Unread 04-13-2018, 12:32 PM   #8
Member
J. A. EARLY
PGCA Member
 
Jerry Harlow's Avatar

Member Info
 
Join Date: Nov 2010
Posts: 2,018
Thanks: 4,214
Thanked 2,821 Times in 914 Posts

Default

Quote:
Originally Posted by Frank Cronin View Post
When you pattern the gun with lead, does it also pattern to the right or just the Tungsten Super loads? If so, any idea why?
Frank,

I did not pattern with lead but today I patterened again with TSS, and even using another gun, a 12 Trojan with .039 in the left barrel and the 12 VHE again.

Again at 40 yards shooting off a Led Sled, the guns pattern to the right greatly. Thus I am sticking to my theory they are regulated for a closer distance. I will have to remember this tomorrow if I get a chance. The 12 VHE is up first.

But most surprising is the 20 gauge one ounce TSS put more pellets in the turkey target's head than the 12s, and that was true with the Fox SW and the Franchi 48-AL. But there would have been so many body shots in all of them that nothing could escape since the TSS will go through the turkey.
Jerry Harlow is offline   Reply With Quote
The Following 2 Users Say Thank You to Jerry Harlow For Your Post:
Unread 04-13-2018, 03:12 PM   #9
Member
Southpaw
Forum Associate

Member Info
 
Join Date: Oct 2017
Posts: 653
Thanks: 634
Thanked 275 Times in 197 Posts

Default

Quote:
Originally Posted by Jerry Harlow View Post
Frank,

I did not pattern with lead but today I patterened again with TSS, and even using another gun, a 12 Trojan with .039 in the left barrel and the 12 VHE again.

Again at 40 yards shooting off a Led Sled, the guns pattern to the right greatly. Thus I am sticking to my theory they are regulated for a closer distance. I will have to remember this tomorrow if I get a chance. The 12 VHE is up first.

But most surprising is the 20 gauge one ounce TSS put more pellets in the turkey target's head than the 12s, and that was true with the Fox SW and the Franchi 48-AL. But there would have been so many body shots in all of them that nothing could escape since the TSS will go through the turkey.
Good luck, hope you get a bird. That is interesting your experience with the 20 gauge but that is why you pattern things. As precise as we try to be we all are still dealing with the chaos of mini explosion scattering a bunch of pellets all over the place and hopefully more of them hit the intended target than not. Some setups just pattern better than others.
Todd Poer is offline   Reply With Quote
The Following User Says Thank You to Todd Poer For Your Post:
Unread 04-01-2018, 02:34 PM   #10
Member
Allan McLane
PGCA Member
 
allan.mclane's Avatar

Member Info
 
Join Date: Jun 2013
Posts: 206
Thanks: 906
Thanked 444 Times in 114 Posts

Default

It looks like it's made in China, using metal injection moulding.... no wonder it's so co$tly.

http://www.globaltungstens.com/tungs...gsten-shot.php
allan.mclane is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:48 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.