Visit Paul Harm's homepage! | |
08-13-2012, 11:33 PM | #3 | ||||||
|
The short kit works nicely on my 10 gauge loader but these little brass things are used just on the crimping stations . And you can slide it back and forth with the shell in it .
Matter of fact the 12 and 20 gauge ones are on the way to me as I type this ! I've also already spoken with someone about making me something similar for the 16 gauge !
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
||||||
08-13-2012, 11:35 PM | #4 | ||||||
|
Of course if I had boatloads of money I'd call Ponsness Warren and get them to make me 800's for the 2 1/2" 12 , 16 and 20 as well as a 2 7/8" for the 10 gauge .
Or better yet just order pallet loads of shells from RST
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
||||||
08-13-2012, 11:38 PM | #5 | |||||||
|
Quote:
I do not argue the point that the short kits are easy enough to install however , this little brass thing Precision Reloading markets is nothing more then a movable spacer for the crimping stations .
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
|||||||
08-14-2012, 01:20 PM | #6 | ||||||
|
i use some things ive modified to load the short ten loadings..charlie
|
||||||
08-15-2012, 07:04 AM | #7 | ||||||
|
I reload RST Lite, and Paper Lite, both 2 1/2", on a 600jr, without the short kit. I just lowered the crimp starter and final crimp plunger.
|
||||||
08-15-2012, 12:30 PM | #8 | ||||||
|
Try a quarter & penny (one on top of the other) in the crimp starter and final crimp stations.
I use this on my sizemaster for 2 1/2" shells while leaving the machine also set for 2 3/4" shells. Mike |
||||||
08-15-2012, 02:40 PM | #9 | ||||||
|
I use 2 washers welded together for my short 16's. I don't bother the primer that way. It stays in the final crimp station. I lowered crimp starter a quarter inch. Cheap and easy.
|
||||||
08-15-2012, 03:02 PM | #10 | ||||||
|
Nothing wrong with inexpensive and do it yourself !
However................................, I already have the brass 12 and 20 gauge spacers on the way . And the 16 gauge is in the works at no cost to me ! The guy thats gonna machine the thing for me owns a Savage 111 LRH in 338 Lapua . I just finsihed working up loads and sighting the thing in for him at 100 , 200 and 350 yards . And about an hour ago I loaded 50 rounds for him free of charge , well let me rephrase that . All he had to pay for were the components he got my time and range work for free . So now it's his turn to return the favor !
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
||||||
|
|