|
11-23-2010, 08:40 PM | #3 | ||||||
|
larry ii beieve you and me are thinking on the same lines in choke and barrel length..those guns of yours sound like what im hoping to have someday when i find one...i also like long barrel guns..it seems ever time i buy a differant gun the barrels turn out to be 32 inch and full and full chokes...im starting back duck hunting this year so maybe the long barrels will pay off...but my next buy will have 26 inch barrels and imp. cly. and full chokes...then with the short barrels andlight weight maybe i canwalk a little farther im not getting any younger.... charlie
|
||||||
11-23-2010, 08:53 PM | #4 | ||||||
|
Charlie and Larry, My PH 16 ga.26" gun is choked cylinder and full per the PGCA letter.The perfect chokes for the grouse woods. The gun is on a one frame and at 6lbs. 10oz. is gettin a little heavy for all day walk's. But I used it this year for half a day while "Da kid" used my bird slayer 20 gauge Trojan.
__________________
"Much care is bestowed to make it what the Sportsman needs-a good gun"-Charles Parker |
||||||
11-23-2010, 09:31 PM | #5 | ||||||
|
larry you have the combination of barrel lengh and chokes im looking for...most all the quail guns of old here in the south were imp cly or had seen a hacksaw some time or another...its hard to find a gun in the south with the combination of chokes your gun has...you fellas are lucky indeed to have those guns..... charlie
|
||||||
All good choices there Charlie- |
11-23-2010, 09:38 PM | #6 | ||||||
|
All good choices there Charlie-
I have a 12 FW Smith with 26" barrels- came with the factory yellow tag- is choked Imp. Cyl. and Mod. and has the higher rib they came out with in 1939.
I like it for SC- DT but extractors, and except for the two-man hurry event, you don't need ejectors. It is an Ideal Grade- the only 12 Smith (OK- all my Smiths are 12 gauge) I own that is post 1913 and is a FW. I am overhauling (strip and clean mechanism) a Field 16 FWE for a friend- made in 1926 (according to Houchin's book) and it has 30" Armor steel barrels both choked Full. Another friend has a 3E made in 1911- that is a light Mod. and Full 28" Nirto Steel barrels and is a great pheasant gun. But I love the 30" and 32" barreled 12 ejector Smiths with tight chokes- great for pass shooting, Euro and tower bird shoots, and I like to see big birds crumple- so I like tighter chokes- Charlie- tell me what you like in 12 hulls- I don't reload anymore- I have some green Remington STS and some red Win AA's- yours for the shipping cost to you- send me a PM if interested. I think its great we can discuss openly the other fine doubles being used and appreciated afield today, besides our Parkers- if you had filet mignon for supper every night, might you not want something different every now and then? |
||||||
11-24-2010, 04:49 AM | #7 | |||||||
|
Quote:
Yawn.........it's time to go chase some ducks! |
|||||||
11-30-2010, 05:40 AM | #8 | ||||||
|
Francis I think you miss my tongue in cheek comment i.e. that you would consider an Elsie to be a fine gun LOL! It is no doubt a fine hand crafted shotgun but time has proven the LC's sidelock design to be seriously flawed. As the years go by a repaired, soon to be cracked stock or a gun I am going to worry about a cracked stock are the Elsie's trademark.
|
||||||
11-30-2010, 08:37 AM | #9 | ||||||
|
I have an 1896 vintage Syracuse Lefever 'G' Grade 12 gauge. It is in real nice shape, considering most 'field grade' guns were really USED! The stock fits me quite well. When I bring it up to my shoulder, it is pointing right where I want it. I kinda like the older stocks with a lot of drop at the heel. It actually fits me better than my RBL 20! I had a nice little .410 with 1/4" cast-off that sold me on the option. I miss it on my RBL, but it doesn't seem to matter with the Lefever, or my'Lifter'. Cheers!
__________________
GMC(SW)-USN, Retired 'Earnest Will' 'Desert Shield' 'Desert Storm' 'Southern Watch' |
||||||
So when "Mayhem" posts- |
11-30-2010, 09:43 AM | #10 | ||||||
|
So when "Mayhem" posts-
About our beloved Parkers we may boast. But other doubles get short shrift- even those "splintered" LC Smiths?""
Pete- I don't know how you did it, but that great new character on the AllState ads. is a Super Avatar on our Forum. So if John Dunkle decides to expand the "Gun of the Month" foto section to include the Avatars chosen, your's gets my vote hands down. I shoulda seen the yawn- IMO the pre-1913 Smith guns, all other things being equal, seem to have less stock spliting near the locks and tang areas- older paper lower pressure shells, denser walnut (remember how both WW 1 & 2 took out a great about of walnut for rifle stocks and early airplane props in WW1)-- better fitting and the first sculpted lock design was the best, again IMO. Storage in sections perhaps in LOM or trunk cases for the higher grades, perhaps the O grade 10 and 12 bores hung over the fireplace mantel in the farmhouse, possibly the only shotgun they owned. Over oiling and lubing and standing the guns butt down in a cabinet or "steel tomb"- once oil migrates into the head of the stock, the bonding fibers of the walnut soften. Using longer shells than the gun was chambered for and Express or short Magnum loads- not for the sidelock guns, whether Smith or Purdey. My 2E 12 with 32" VR barrels does have 3" chambers and reinforcing "Y" on the under rib, not marked Longrange however- But I only shoot 2 & 3/4" shells in it- One nice advantage of the Smith design is the detachable sidelocks for cleaning, firing pin replacement if needed, etc. Both Smith, AH Fox and Ithaca (I believe) use some form of a rotary tapered locking bolt spring driven into the mating recess in the barrel rib extension at breech. Parker used the doll's head- all fine concepts when developed in the 1880 era (aprox.) but when Browning brought about their Super Duper Posed O/U and Winchester their Model 21- aprox 1930 era- greater advances in metallurgy and machining techniques were extant (some due to WW1 arms production perhaps)-- But when all is said and done, this is our Parker site, and while it is always fun and even fascinating to discuss other double guns herein, and under the code of gentlemanly conduct not always present on other BBS websites, we all to a man here must indeed treasure our Parkers or else how do you explain the steady growth with new members eager to learn about their first Parker, whether it is a 16 bore Trojan or a 20 bore BHE. |
||||||
|
|