Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Non-Parker Specific & General Discussions Damascus Barrels & Steel

Notices

Reply
 
Thread Tools Display Modes
Damascus Barrels-Shooting Sportsman
Unread 08-12-2015, 06:46 PM   #1
Member
Bruce Day
PGCA Lifetime
Member
 
Bruce Day's Avatar

Member Info
 
Join Date: Nov 2008
Posts: 4,995
Thanks: 554
Thanked 15,664 Times in 2,672 Posts

Default Damascus Barrels-Shooting Sportsman

The Sept-Oct 2015 issue of Shooting Sportsman magazine has an interesting article about the barrelman who is doing the Damascus work for Greener in those few shot guns that become available. The guns are made with old, raw tubes that were retained in stock. The article describes the process of barrel filing, boring, chambering and fitting, and the time consuming process of working with Damascus. Of interest is the price of these Greener guns, which are the price of a new Lamborghini, which I take is costly indeed.

We are fortunate in that Parker and other top American makers used top quality Damascus barrels, and prices for mid level ( D grade) or even high level Parkers with Damascus barrels are cheap by comparison. Some are even small bores, and small bore Damascus British game guns would be very difficult to find.

I and many friends are particularly attracted to Damascus barrel Parkers for their attractiveness, and we use them for shooting targets and game without hesitation.

So here are a few photos of Damascus guns. You will see the common 2 and 3 Croille, and the less common Bernard, Chain and Stars and Bars.
Attached Images
File Type: jpg 100_5073.jpg (87.6 KB, 486 views)
File Type: jpg 102_2028.jpg (209.5 KB, 9 views)
File Type: jpg 102_2050.jpg (136.9 KB, 8 views)
File Type: jpg B grade.jpg (248.8 KB, 7 views)
File Type: jpg bartle%20046.jpg (112.7 KB, 484 views)
File Type: jpg Ghammer%20289.jpg (78.0 KB, 480 views)
File Type: jpg Stars & Stripes.jpg (209.3 KB, 10 views)
File Type: jpg BHE 12 Bernard Parker - 22 (7).jpg (278.3 KB, 7 views)
File Type: jpg chammer13.jpg (149.8 KB, 6 views)
File Type: jpg hs55.jpg (128.1 KB, 8 views)
File Type: jpg meridenaubrey.jpg (125.0 KB, 484 views)
Bruce Day is offline   Reply With Quote
Unread 08-12-2015, 10:07 PM   #2
Member
Dean Romig
PGCA Invincible
Life Member
 
Dean Romig's Avatar

Member Info
 
Join Date: Dec 2008
Posts: 32,046
Thanks: 36,720
Thanked 34,163 Times in 12,637 Posts

Default

For raw pure class nothing even comes close to composite barrels on a fine shotgun.
They lend a 'personality' to a gun that everything else can only complement.
Dean Romig is offline   Reply With Quote
The Following 4 Users Say Thank You to Dean Romig For Your Post:
Unread 08-13-2015, 12:14 PM   #3
Member
Mills
PGCA Lifetime Member
Since 3rd Grade
 
Mills Morrison's Avatar

Member Info
 
Join Date: Nov 2011
Posts: 10,386
Thanks: 14,456
Thanked 12,501 Times in 4,474 Posts

Default

Yes, I was going to post about that article but Bruce beat me to it. One of the more interesting articles I have read lately.
Mills Morrison is offline   Reply With Quote
Unread 08-13-2015, 12:52 PM   #4
Member
Parker Bachelder (Brad's Profile)
PGCA Member

Member Info
 
Join Date: Jun 2009
Posts: 296
Thanks: 177
Thanked 1,928 Times in 203 Posts

Default

Bruce
I agree, great article with the exception of the Brown finish color. I find it interesting that the barrels are proofed the same way they proof fluid steel barrels.
Brad Bachelder is offline   Reply With Quote
The Following 2 Users Say Thank You to Brad Bachelder For Your Post:
Visit Brad Bachelder's homepage!
Unread 08-13-2015, 02:34 PM   #5
Member
Bruce Day
PGCA Lifetime
Member
 
Bruce Day's Avatar

Member Info
 
Join Date: Nov 2008
Posts: 4,995
Thanks: 554
Thanked 15,664 Times in 2,672 Posts

Default

Quote:
Originally Posted by Brad Bachelder View Post
Bruce
......... I find it interesting that the barrels are proofed the same way they proof fluid steel barrels.

Which was the same way Parker did their proof testing. The last known Damascus barreled Parker was made in 1927 and was proofed using procedures that became the SAAMI standard.

Damascus barreled Parkers and other high end guns are real treasures in my opinion. And real bargains with the price of a new Greener at over $200,000, that looks wonderful but not that much more wonderfuller, if any, than a nice high grade Damascus Parker.

Notice that the Greener barrels are fairly open twist, not the more complex and costly extra fine Damascus or Bernard used by Parker.

I'm going to go hug my Damascus Parkers and Lefever.
Bruce Day is offline   Reply With Quote
The Following 8 Users Say Thank You to Bruce Day For Your Post:
Unread 08-13-2015, 03:29 PM   #6
Member
Eric Estes
PGCA Member

Member Info
 
Join Date: Jan 2011
Posts: 338
Thanks: 1,630
Thanked 218 Times in 113 Posts

Default

Speaking of Greener, I recently read his book "The Gun and It's Development". In my volume it was about page 239 where he spoke at length about the pattern welded barrel types. He made reference to strength/bursting trials the Birmingham proof house conducted of 39 different varieties. English 3 stripe laminated came in first. Some of the fancier patterns were further down the list in this trial. For example he characterized Belgian 6 stripe as "overtwisted" and weakened.

Although I did not know what to make of it all it was very interesting reading and it was clear to me at least that Mr. Greener seemed partial to English barrels and less fancy patterns. There are a couple places in the book where he seems to turn his nose up at some of the fancier patterns Belgium producers would make. He seemed to think it was more about marketing and glitz than functionality. At least that was my take away.

Not that this has any bearing on what the Greener company might be doing today, but I found his assertion that some fancier grade Damascus from Liege and elsewhere might be weaker than other simpler patterns very surprising.

IMO they are all beautiful and I will pick any of them over fluid steel every time.
Eric Estes is offline   Reply With Quote
The Following 4 Users Say Thank You to Eric Estes For Your Post:
Unread 08-13-2015, 09:39 PM   #7
Member
GH-16
PGCA Member

Member Info
 
Join Date: Nov 2009
Posts: 1,015
Thanks: 5,330
Thanked 1,327 Times in 454 Posts

Default

I found it to be a very interesting article all around. Damascus barreled guns have become my main focus in collecting over the last few years. I totally agree with Bruce's comments about what nice grades of Damascus Parker used throughout all their grades of guns.

Bruce: Thank you for posting the pictures you post of these Damascus beauties !!!
Paul Ehlers is offline   Reply With Quote
Unread 08-15-2015, 11:41 AM   #8
Member
Eldon Goddard
PGCA Lifetime
Member

Member Info
 
Join Date: May 2012
Posts: 846
Thanks: 312
Thanked 390 Times in 170 Posts

Default

Bruce can you tell me more about the parker with the American flag bunting pattern? Have you ever seen a Parker with chain Damascus? Pattern Welded barrels are true examples of art and craftsmanship.
Eldon Goddard is offline   Reply With Quote
Unread 08-15-2015, 04:09 PM   #9
Member
Bruce Day
PGCA Lifetime
Member
 
Bruce Day's Avatar

Member Info
 
Join Date: Nov 2008
Posts: 4,995
Thanks: 554
Thanked 15,664 Times in 2,672 Posts

Default

Early hammer guns particularly lifter action models often had usual Damascus barrels. Stars and bars, American flag bunting , etc.

I have never seen nor have I ever heard reports of chain Damascus on a Parker.
Bruce Day is offline   Reply With Quote
The Following User Says Thank You to Bruce Day For Your Post:
Unread 08-15-2015, 05:24 PM   #10
Member
ch
PGCA Lifetime
Member
 
calvin humburg's Avatar

Member Info
 
Join Date: Dec 2009
Posts: 1,816
Thanks: 1,654
Thanked 640 Times in 351 Posts

Default

Agreed!
__________________
Father, will I be able to be brave when I am afraid? Child, that is the only time one can be brave.
calvin humburg is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:59 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.