|
04-26-2011, 04:07 PM | #3 | ||||||
|
Just get some cardboard and some glue and make some..... can't be that difficult...
|
||||||
04-26-2011, 04:25 PM | #4 | ||||||
|
|
||||||
04-26-2011, 04:33 PM | #5 | ||||||
|
please post us some pictures of your parker 10 ga shells when you get them completed...should be a very attactive box...... charlie
|
||||||
04-26-2011, 07:33 PM | #6 | ||||||
|
I want to see the old ten gauge Parker box. By the way, do you have the facilities to make one piece shell boxes from a pattern. We can send you a model if this is what you need.
|
||||||
04-27-2011, 07:43 AM | #7 | |||||||
|
Quote:
I believe there are box manufacturers who will make anything you need, as long as they have dimensions. With a little searching I might be able to come up with something. I'm not sure what the minimum order would be though.....I'm sure there are probably enough guys here shooting short tens that might want a few. I'll see if I can find anything reasonable. |
|||||||
04-27-2011, 09:05 AM | #8 | ||||||
|
Alex Papp at RST obviously has a source for one piece boxes and the printing of marvelous logos. Unfortunately, their ten gauge boxes are ten packs, not twenty fives. However, Alex may be willing to share his source with you.
|
||||||
The Following User Says Thank You to Bill Murphy For Your Post: |
04-28-2011, 02:37 PM | #9 | ||||||
|
Make your own, it's not very hard. Fine a 10ga box, take it apart and trace around it. Then measure the amount less you want and shorten the necessary sides. I've done it for 2" 12ga and 2 1/2" 12ga a number of times. Doesn't take that long. Paul
|
||||||
The Following User Says Thank You to Paul Harm For Your Post: |
05-04-2011, 10:08 PM | #10 | ||||||
|
forrest how are you coming along with them boxes...looking forward to seeing them... charlie
|
||||||
|
|