|
01-19-2012, 06:04 PM | #3 | |||||||
|
Quote:
Do you have any old reloading manuals laying around with short ten recipes? |
|||||||
01-19-2012, 06:13 PM | #4 | |||||||
|
Quote:
No the only thing I have with 2 7/8" loads is the BPI 10 gauge manual and their buckshot manual . And to be honest I don't use any of the loads they have listed .
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
|||||||
01-19-2012, 06:21 PM | #5 | ||||||
|
To be totally honest I only have two loads !
The one I use , which I got from Reloader Magazine a few years back when Ross Seyfried did an article on his favourite loads . And it just so happened he has or had a W.&C. Scott 10 gauge with damascus and hammerless just like mine . So I use his load for 1 1/4 ounces of shot for just about everything ! It works out pretty well as I can load 1 1/4 ounces of whatever shot I want inside a SP-10 wad with a 16 gauge 1/4" fiber wad in the bottom of the shot cup and a .135" 10 gauge card wad above the shot . Pushed with 30 grains od SR7625 and lit with a CCI209 . I can also leave out the birdshot , 16 gauge wad and the card and put twelve 00 Buck pellets for pretty much the same thing ! I have another load writtin down in my loading room somewhere for a 1 1/2 Ounce of shot in the SP-10 , a .135" card wad , Universal Clays and a CCI209 . Don't remmember how much of that off the top of my head . But to be honest I'm quite satisfied with the load I'm using at 1 1/4 ounces . And hopefully I can come up with a decent roundball that will fit inside the SP-10 and be safe in my old damascus gun !
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
||||||
01-19-2012, 06:43 PM | #6 | ||||||
|
I am trying to find more loads, particularly those that use more common powders such as Green Dot, Herco, 700X, HS-6 etc. I have shot lots of 32gr SR7625 loads myself but a Green Dot load is/would be much more cost efficient. My cost for GD is $20 a pound vs $27 a pound for SR7625. GD and 700X would be more reliable in cold weather as well.
|
||||||
01-19-2012, 10:10 PM | #7 | |||||||
|
Quote:
I'm pretty happy with this load and Unique in my 16 damascus Parker . Now I need to move on to my like new W.&C.Scott 12 and 20 gauge damascus hammerless guns ! Also wanna work on single roundball loads in the short 10 and short 16 ! Back years ago shotgun reloading to me was all about loading enough shells quickly for a skeet or trap shoot the upcoming weekend Now if I go shoot skeet I may shoot a couple rounds 10 or 12 times a year . And the rest to date has been for dove or buckshot for deer
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
|||||||
01-19-2012, 10:11 PM | #8 | ||||||
|
Pete , while we're at it do you possibly have a spread sheet for the 8 gauge ?
No I don't have one "yet" but it doesn't hurt to get yourself prepared before the fact
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
||||||
01-20-2012, 01:39 PM | #9 | ||||||
|
JB:
I'm letting a bit of the cat out of the bag here (regards an upcoming DGJ story of mine) but here are two loads that I use in a W&C Scott 10-bore: Target: Federal case cut to 2 7/8, Win 209 primer, 21.1 grs of Clays, BP deci-Max with 16 ga. .135 card and 3/8 felt wads inside, 1 1/8 oz. of No. 8. Load is 1217 fps and 7640 psi according to Armbrust. Hunting: 1 3/8 oz of No. 6 in same case, same BP wad, two .135 16 ga cards inside, 28 grs. of Int. Clays. 1246 fps and 10,100 psi by Armbrust. Best Kensal |
||||||
The Following User Says Thank You to John Campbell For Your Post: |
01-23-2012, 07:05 PM | #10 | |||||||
|
Quote:
|
|||||||
|
|