Galazan Barrel Questions

[VH20]

I know we've been through this before, but I still have a few questions and was wondering if anyone has any more insight.

The problem: A 1923 VHE 00-frame 28 ga. w/ sewer-pipe bores - beyond hope, and believe me I've tried to be optimistic. The rest of the gun is in pretty good shape.

As I understand it, the only original Parker barrels CSMC offers are for 0-frame only. They have 28s, but only in 0-frame. They DO have 00-frame Repro barrels, but only in .410. They ALSO manufacture the Remington Parker in 00-frame 28ga., including barrels. They claim these guns (which I assume includes the barrels) are identical to originals.

Here are my questions, and I hope a few of you with some knowledge of these can take a whack at them:

1)What is the physical difference between the Repro Barrels and Original Barrels, and is there any possibility of fitting Repro barrels to the original? Even if they can, I'm not man-enough for a .410, but they obviously have 28 ga. tubes on hand so why no 28 00 frame Repro barrels?

2)If they already make 28 00-frame barrels for the Remington gun, why would they not be available like all the others are? If they were, would they be likely candidates for fitting to an original? A set of those in-the-white would be righteous for the gun I described.

It just doesn't quite make sense to me - they have the capability to offer so many more options because they already have everything in place. If you're making 28 ga. 00 frame barrels for one gun, making .410 00 frame barrels available, and 28 0 frame barrels available, it would seem that 28 00 frame barrels would be a no-brainer because they already have them. I really HATE to have these barrels sleeved. If Teague ever offers their process for 28s I wouldn't hesitate (perfect solution in my mind) but for now that is just a wishing well. A set of replacement barrels would allow shooting of the gun now, and the originals could sit in the safe until someone is one day able to re-line them.

I know I should be directing these comments to CSMC, but I offer it up here for discussion because you guys have a different perspective, lots of experience, and aren't towing a company line. I probably will approach them eventually, but until then, what do you guys think? Thanks,

Jim

[Joe Bernfeld]

Jim, I went to their website to remind myself what their ad for Parker Repro bbls said, but I couldn't find it; the new A-10 must be taking up too much space. Last time I looked they were advertising 28 ga 28" mod/full bbls for the 28 ga 00 frame Parker Repros. In the original literature, Parker Repro claimed their bbls could be fitted to original Parkers (except Trojans of course) so I don't see why the Galazan bbls couldn't be also. The Remington Parkers made by CSMC cost $49,000 so I doubt you'd want a set of those bbls; they would be really expensive. I guess you'll have to call them since I don't know of anyone on this board who has bought a set yet; the .410 bbls are not even available yet (I asked last week).
Joe

[VH20]

Thanks, Joe. Regarding the Rem Parker barrels, there shouldn't be any difference in those barrels in-the-white, and the others. A set of raw Parker barrels is the same for any grade until they start to finish, engrave, etc. I wouldn't think there would be any difference in those and the 0-frame barrels for original Parkers they offer, until they start finishing them. But that is purely assumption on my part.

[Brush Buster]

While on the subject, does any one know if Galazan will be set up at the Vintagers and if they possibly will have any barrels there available if they are there ?

[John D.]

Originally Posted by Russ Jackson

While on the subject, does any one know if Galazan will be set up at the Vintagers and if they possibly will have any barrels there available if they are there ?

Yes. I know for a fact they will be, as I just called them for another reason altogether and we chatted about their attendance this year.

Best to you,

John

[Autumn Daze]

I,m confused. Is Galazan going to be selling .410 barrels for the 00 Frame 28 gauge Repro's?

[Wild Skies]

Originally Posted by Dave Suponski

I,m confused. Is Galazan going to be selling .410 barrels for the 00 Frame 28 gauge Repro's?

No need for confusion Dave, they're listed as being for sale on CSMC website. What seems to be of some question is how well your existing forend will fit and how much additional weight the .410 bbls. will add to the gun.

Here again is the link to these barrels, click on it then scroll to the bottom of the page.
http://www.csmcspecials.com/SearchRe...=17&Search.y=8

[Autumn Daze]

Thanks Greg!

[Wild Skies]

I doubt very much that you'll see CSMC at the Vintage Cup.

The replacement barrels are still listed, follow the link below and scroll to the bottom of the page.

http://www.csmcspecials.com/SearchRe...=17&Search.y=8

[Double Play]

Originally Posted by Greg Baehman

I doubt very much that you'll see CSMC at the Vintage Cup.

The replacement barrels are still listed, follow the link below and scroll to the bottom of the page.

http://www.csmcspecials.com/SearchRe...=17&Search.y=8

Greg,
CSMC has been to every Vintage Cup Event that I've attended. A quick check of this years vendors shows that they will be there this year as well. If someone is interested in possibly purchasing a set of these replacement barrels they should call Lou and ask if he would bring a set to Pintail.