![]() |
| |||||||||||||||||||||||||||||||||||||||
|
|
#3 | ||||||
|
Dave's advice is spot on. I would not use Parker ejectors as a do-it-yourself project. They are a bit complicated. I know many very competent gunsmiths who do not (or will not) work on them. DelGregos have bins of parts for them
|
||||||
|
|
|
||||||
|
|
#4 | ||||||
|
There is a very helpful forum dedicated completely to Parker Ejectors.I have been searching a bunch of forums about it and one of the things I have read is that you should never post a serial number.You need to take the barrels off and look on the water table the flats on the receiver.
|
||||||
|
|
|
||||||
| A Parker ejector website-?? huumm=- |
|
|
#5 | ||||||
|
Mr. Kaas is right on the money- Del Grego the parts and knowledge, and the Parker ejectors require a watchmaker's precision touch- ditto the Alan Lard LC Smith single trigger- No place for an amatuer.
I wondered about the entire serial number of a fine double on any website or discussion forum- there are "trollers" after Walleyes, and "trollers" after confidential information with an eye to possible "no good deed"-- I feel safe in posting here on the PGCA: the GHE project Parker- with VH No. 2 barrels and a later series GH buttstock- so three sets of numbers- Austin Hogan was kind enough to print that story a few issues ago- I also posted the sn of a PH 16 on the O frame (about the same vintage as the GHE 12 bore- 1905-1908 herein- without concern. HOW-SOME-EVER-- I would NOT do that elsewhere. Perhaps the safest way for you to proceed is to send in a research letter and your check to our Committee- safe as houses, if the records are available for your Parker you'll have your answer(s), and if not, you'll receive your check back uncashed an a letter of explanation- Win-Win all the way--
|
||||||
|
|||||||
![]() |
| Thread Tools | |
| Display Modes | |
|
|