![]() |
![]() |
![]() |
|||||||||||||||||||||||||||||||||||||||
|
![]() |
![]() |
![]() |
#3 | ||||||
|
![]()
I've sat out with a Parker in the absolute pouring rain and never had a problem as long as I cleaned and oiled them when I got home. These guns were made to be used, not as a collectible, people seem to forget that sometimes.
DLH
__________________
I was as virtuously given as a gentleman need to be; virtuous enough; swore little; diced not above seven times a week; went to a bawdy-house once in a quarter--of an hour; paid money that I borrowed, three of four times; lived well and in good compass: and now I live out of all order, out of all compass. Falstaff - Henry IV |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following 2 Users Say Thank You to Destry L. Hoffard For Your Post: |
![]() |
![]() |
![]() |
#4 | ||||||
|
![]()
Paul,
Destry and Dave are correct. You can't hurt them by getting them wet. First off don't put it in your gun case wet. Wipe it down first by drying it with any absorbent toweling then with any good oil. When you get home break the gun down and allow it to air dry overnight (stock-receiver, forend and barrels) laid out on an incline so they can drain off any remaining moisture. Next day wipe them down again, reassemble and you are good to go. By the way I see you are from Md. Where are you hunting this weekend? Good luck and have fun. Daryl |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to Daryl Corona For Your Post: |
![]() |
![]() |
![]() |
#5 | ||||||
|
![]()
If you're really worried about it, wax it before you go hunting. All of my damascus and twist bbld guns are waxed and I used to wax my pump when I used it for waterfowl.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to Richard Flanders For Your Post: |
![]() |
![]() |
![]() |
#6 | ||||||
|
![]()
Double Lab is spot-on for technique. But if it were me, I would not put Ballistol on any wood finish, per Autumn Daze suggestion. It's just me, but if something is good on steel, I can't see it being good on wood finish.
Best, Kensal |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to John Campbell For Your Post: |
![]() |
![]() |
![]() |
#7 | ||||||
|
![]()
paul take destrey advice and take that gun a hunting rain or shine.... charlie
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to charlie cleveland For Your Post: |
![]() |
![]() |
![]() |
#8 | ||||||
|
![]()
Kensal,Thank You for your opinion. Ballistol was invented by the german military during WW1 and is safe for wood as well as steel. I have used it on a cotton cleaning patch to wipe my guns down for the last 10+ years to no ill effect. I use it as a light treatment before putting any gun away. Another feature that I like about it is that handling a gun in humid weather I have never had a problem with those nasty little finger prints of rust that sometimes show up.
__________________
"Much care is bestowed to make it what the Sportsman needs-a good gun"-Charles Parker |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following 6 Users Say Thank You to Dave Suponski For Your Post: |
![]() |
![]() |
![]() |
#9 | ||||||
|
![]()
Ballistol is also a great bug repellant, because it stinks so well.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to edgarspencer For Your Post: |
![]() |
![]() |
![]() |
#10 | ||||||
|
![]()
Paul, my guns---Parkers included---are slopped over with salt and fresh water all the time, down the barrels, everywhere. They were made for it. Just clean them properly---as above.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to King Brown For Your Post: |
![]() |
|
|