|
 |
 |
|||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||
 |
 |
03-30-2017, 08:40 AM
|
#3 | ||||||
|
The "Editors Gun" has a set of 30" Vulcan Steel barrels. It it a hammer gun.
It is a Grade-0 with the barrel limiting hook and pin and with a Grade-4 hammer on one side and a very closely matching Grade-5 hammer on the other side. The lug was modified considerably in order to for the barrels to the frame - so yes, it can be done... but it will be quite expensive. .
__________________
"I'm a Setter man. Not because I think they're better than the other breeds, but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture." George King, "That's Ruff", 2010 - a timeless classic. |
||||||
|
|
||||||
 |
 |
 |
|
|
|
03-30-2017, 08:55 AM
|
#4 | ||||||
|
Yes,it can be done and not that expensive. Contact Dave Fjelline
|
||||||
|
|
|
||||||
|
|
|
| The Following 2 Users Say Thank You to David Dwyer For Your Post: |
|
|
|
03-30-2017, 11:04 AM
|
#5 | ||||||
|
I just noticed the twist barrels have three bites (if thats what they are called) it would take some work to fit
|
||||||
|
|
|
||||||
|
|
|
|
|
|
03-30-2017, 11:37 AM
|
#6 | ||||||
|
That is correct. Call Dave Fjelline.
.
__________________
"I'm a Setter man. Not because I think they're better than the other breeds, but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture." George King, "That's Ruff", 2010 - a timeless classic. |
||||||
|
|
|
||||||
|
|
|
|
|
|
03-30-2017, 09:02 PM
|
#7 | ||||||
|
I have never seen a Parker Bro shot gun with three bites. Am I missing something.
|
||||||
|
|
|
||||||
|
|
|
|
|
|
03-30-2017, 09:17 PM
|
#8 | ||||||
|
No, the lug has three lumps, front to rear. One is the barrel hook, the next is the limiting hook, and the last or rearmost lump is the locking lug.
.
__________________
"I'm a Setter man. Not because I think they're better than the other breeds, but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture." George King, "That's Ruff", 2010 - a timeless classic. |
||||||
|
|
|
||||||
|
|
|
|
|
|
03-30-2017, 10:19 PM
|
#9 | ||||||
|
It can be done.
To do it properly a check hook must be installed on the hammerless barrels and the lug modified appropriately so that a positive stop is had for the barrels. Some just like to cut the check pin out and call it a day which would lead to too much stress on the roll joint/forend.
__________________
B. Dudley |
||||||
|
|
|
||||||
|
|
|
|
|
|
03-31-2017, 08:11 AM
|
#10 | ||||||
|
I might have called them bites, that would be the wrong nomenclature, it would be the lumps I was referring too.
|
||||||
|
|
|
||||||
|
|
|
| The Following User Says Thank You to Rick Riddell For Your Post: |
 |
|
|
Linear Mode
