Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
I am trying to get as much info as possible on this SXS Parker. The case shows colors unlike anything I have seen before, but have been told by 1 gunsmith that it could be a factory finish. All the info is below. If anyone has any info, I would be greatly appreciative.
Serial # 150XXX (The full serial is visible on the watertable)
1909 manufacture date based on the serial #
Side by Side Double Barrel 12 Gauge
Rib says Vulcan Steel
Lines on the rib go all the way to the end of the 26" barrels
Blueing faded on the barrels
Barrels need to be tightened (have a little play in them)
Case has tiger striped symmetrical pattern
Frame size on barrel lug is faded
I am curious about the following info:
Did the shotgun actually came with the 26" from the factory?
Does the case appear to be factory finished?
Any idea of value?
Is there anything in the order books on the factory frame size?
Any other info on the gun from the experts here that I am not bright enough to ask about?
I have new, but from what I have seen on the forums, the Research Letter is important to have, but it doesn't answer some questions and even raises other questions. I plan on getting the Research Letter, but I was hoping to get some informatino beforehand.