Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Parker Forums Parker Hammer Guns

Notices

Reply
Thread Tools Display Modes
Q2 1882 12ga Lifter Pls Advise
Unread 05-27-2013, 05:30 PM   #1
Member
jerry serie
PGCA Member

Member Info
 
Join Date: Jan 2013
Posts: 68
Thanks: 20
Thanked 40 Times in 22 Posts

Default Q2 1882 12ga Lifter Pls Advise

Several years ago I rescued this old Parker Lifter from an antique shop in rough condition. I had intended it to be a wall hanger. But, since rejoining PGCA I'm beginning to wonder whether it may have greater utility. The gun is consistent with the research letter I received with Damascus barrels, 30 inches, and on a size 1 frame. The wood is sound but dark with heavy varnish. The barrels are off-frame and are pitted with dents (see attached photos). I'm not looking to restore but wonder if could be professionally cleaned up, put back on face, and wall thickness measured to maybe shoot again. My question is whether it is a worthwhile candidate? I've never seen a Q2 with this same engraving pattern before. Is this typical of Q2's? I realize 1882 was quite a transitional period for Parkers.

Any information, advise, or recommendations would be appreciated.

Jerry
Attached Images
File Type: jpg IMG_1370.jpg (519.4 KB, 11 views)
File Type: jpg IMG_0351.jpg (505.2 KB, 4 views)
File Type: jpg IMG_1364.jpg (499.9 KB, 11 views)
File Type: jpg IMG_1371.jpg (495.8 KB, 3 views)
File Type: jpg IMG_1363.jpg (506.2 KB, 3 views)
jerry serie is offline   Reply With Quote
Unread 05-27-2013, 06:22 PM   #2
Member
OH Osthaus
PGCA Lifetime
Member
 
Rick Losey's Avatar

Member Info
 
Join Date: Jul 2010
Posts: 7,935
Thanks: 1,778
Thanked 8,547 Times in 3,347 Posts

Default

just my opinion - go ahead and have it evaluated by a pro -

the obvious questions along with wall thickness is how bad is the pitting, and can the dents be raised, good solid wood on one of these old pieces is a plus

I think any of these old guns that can be saved - should be saved.
__________________
"If there is a heaven it must have thinning aspen gold, and flighting woodcock, and a bird dog" GBE
Rick Losey is offline   Reply With Quote
Unread 05-27-2013, 07:14 PM   #3
Member
Mills
PGCA Lifetime Member
Since 3rd Grade
 
Mills Morrison's Avatar

Member Info
 
Join Date: Nov 2011
Posts: 10,450
Thanks: 14,698
Thanked 12,644 Times in 4,525 Posts

Default

The engraving is unique. The typical flying geese look more like snipe. Certainly worth an evaluation by a pro.
Mills Morrison is offline   Reply With Quote
Unread 05-27-2013, 09:43 PM   #4
Member
charlie cleveland
Forum Associate

Member Info
 
Join Date: Jul 2009
Posts: 12,986
Thanks: 0
Thanked 7,806 Times in 3,970 Posts

Default

pretty good looking old gun to me...interesting engraving...do as the boys stated get opinion of a well versed parker or side by side man and fix or shoot as is if deemed safe...looks like a shooter to me a keeper for sure....
charlie cleveland is offline   Reply With Quote
Unread 05-28-2013, 09:07 AM   #5
Member
jerry serie
PGCA Member

Member Info
 
Join Date: Jan 2013
Posts: 68
Thanks: 20
Thanked 40 Times in 22 Posts

Default

Thanks everyone for your input and recommendations! I'm not sure who would be the best person to send it to for an evaluation and cleaning. I've heard Brad Bachelder is good and Kirk Merrington is as well. But, are they knowledgeable of early Parker grades and differences? Are there others to consider e.g. Del Grego & Son.

I have included a couple of additional photos of sn 23089. Bottom of receiver showing more scroll engraving and vignette circle. Also, barrel lugs showing DD marking, which I assume refer to Damascus or do the double D's have different meaning from a single D?

Thanks Again .....Jerry
Attached Images
File Type: jpg IMG_1356.jpg (497.2 KB, 14 views)
File Type: jpg IMG_1369.jpg (491.7 KB, 10 views)
jerry serie is offline   Reply With Quote
The Following User Says Thank You to jerry serie For Your Post:
Unread 05-28-2013, 09:20 AM   #6
Member
Dean Romig
PGCA Invincible
Life Member
 
Dean Romig's Avatar

Member Info
 
Join Date: Dec 2008
Posts: 32,954
Thanks: 38,666
Thanked 35,888 Times in 13,162 Posts

Default

On later Parkers the DD stamp is thought to be an indicator of "finest Damascus", whereas a single D is for "fine Damascus", and the DD stamp is generally only seen on Grade 5 and above guns. A clearer picture of the barrel flats might make it easier to examine the markings on your Parker. One that I have not seen before is the stylized "9" just above John Stokes' stamp J.S.

Also, if the Damascus pattern is more distinct in the more protected area beneath the forend, please post a picture of that as well.
Dean Romig is offline   Reply With Quote
Unread 05-28-2013, 11:48 AM   #7
Member
jerry serie
PGCA Member

Member Info
 
Join Date: Jan 2013
Posts: 68
Thanks: 20
Thanked 40 Times in 22 Posts

Default

Thanks Dean for all the new information. This is most helpful. I have attached a few more photos per your request. The Damascus pattern is very fine and difficult to photograph with the camera I have. The barrel flats do not have any more than you can see here. Do you think this gun is a good candidate to be cleaned up by a professional? Thanks ......Jerry
Attached Images
File Type: jpg IMG_1442.jpg (427.7 KB, 7 views)
File Type: jpg IMG_1448.jpg (521.5 KB, 5 views)
File Type: jpg IMG_1368.jpg (525.5 KB, 5 views)
jerry serie is offline   Reply With Quote
Unread 05-28-2013, 12:22 PM   #8
Member
edgarspencer
PGCA Member
 
edgarspencer's Avatar

Member Info
 
Join Date: Sep 2011
Posts: 6,601
Thanks: 3,330
Thanked 13,136 Times in 3,479 Posts

Default

Seems like a lot more engraving on the bottom of the receiver than other grade 2 guns I've seen. Worthy of making it right, in my book anyway. I've been known to stand on the edge of deep holes and shake out my wallet, but your gun is pretty nice.
edgarspencer is offline   Reply With Quote
The Following User Says Thank You to edgarspencer For Your Post:
Unread 05-28-2013, 08:47 PM   #9
Member
David Hamilton
Forum Associate

Member Info
 
Join Date: Nov 2008
Posts: 289
Thanks: 290
Thanked 75 Times in 56 Posts

Default

A 1 frame Damascus barreled gun will require a good gun smith to evaluate before firing it. BUT my experience is that those old damascus barrels are tough and dents can be raised and pits made better. Pits don't intertfere with shooting but do require more cleaning, or as Bill Murphey says, " Just shoot it until the pits go away" or something like that. A fine old gun like that should be brought back if possible. I hope it can be! David
David Hamilton is offline   Reply With Quote
Unread 05-28-2013, 08:53 PM   #10
Member
Dean Romig
PGCA Invincible
Life Member
 
Dean Romig's Avatar

Member Info
 
Join Date: Dec 2008
Posts: 32,954
Thanks: 38,666
Thanked 35,888 Times in 13,162 Posts

Default

Thanks Jerry. I am at a loss as to the DD stamp. Those barrels are not what is considered "finest Damascus" which I believe is known as '6-iron crolle'. Your barrels are fine Damascus and are most likely 3 or possibly 4-iron crolle. Nice gun none the less. Yes, it is worthy of being "cleaned up by a professional" but I would advise against a complete restoration. It looks like it could be tightened up as well as being cleaned up.
Dean Romig is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:18 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.