|
 |
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
Case |  |
10-03-2025, 08:36 AM
|
#3 | ||||||
|
Case
I think it will I have a 20 gauge with 26 barrels I will try it.
I won’t be back home till next week. I will follow up. Bob |
||||||
|
|
||||||
 |
 |
 |
|
|
|
10-03-2025, 06:46 PM
|
#4 | ||||||
|
The case will fit a 20ga, 26" barrel, but snap cap holes will be for a 28ga.
|
||||||
|
|
|
||||||
|
|
|
|
|
|
10-03-2025, 08:34 PM
|
#5 | |||||||
|
Quote:
The two cases I have that are original to both of my 28ga. Repros, one a 2-bbl. case the other for a single bbl. gun, 20ga. snap caps fit snuggly and 28ga. snap caps fit loosely. I see no difference between Emmebi cases made for 28 or 20ga. Repros - other than the possibility of differing lengths to accommodate 26" or 28" barrels.
__________________
Wild Skies Since 1951 |
|||||||
|
|
|
|||||||
|
|
|
|
|
|
10-03-2025, 09:08 PM
|
#6 | ||||||
|
Yes, my 2-barrel, 20ga hole measures .700", & my 2-barrel, 28ga hole measures .650"
|
||||||
|
|
|
||||||
|
|
|
|
|
|
10-03-2025, 09:33 PM
|
#7 | ||||||
|
So will your 20ga. snap cap fit in your 28 ga. case's snap cap hole snuggly?
__________________
Wild Skies Since 1951 |
||||||
|
|
|
||||||
|
|
|
|
|
|
10-03-2025, 09:59 PM
|
#8 | ||||||
|
No they will not. Not even with a mallet. The 20ga are too large for my 28ga holes. Over the years I've had 4 20 ga & 28ga sets & they were all the same. Maybe you have something different, or you're 28ga case was ment for a 20ga case
|
||||||
|
|
|
||||||
|
|
|
|
|
|
10-04-2025, 08:06 AM
|
#9 | ||||||
|
Well, I’ll be.
I’ve got the two cases that I mentioned above for my twenty-eights. I also have two cases that were furnished for my twenties, one for a single 26” gun, the other for a 2-bbl. set. In each of the four cases, the snap caps fit the same — 28’s are loose and 20’s are snug.
__________________
Wild Skies Since 1951 |
||||||
|
|
|
||||||
|
|
|
|
|
|
10-04-2025, 08:22 AM
|
#10 | ||||||
|
Who knows how the cases were ordered by PRS back in the 80's and how they were mated to the guns. 3 of the sets I've had were in origin boxs with gun in Parker box & case in separate box & both in a sleeve & then in final shipping box. So, who knows how the pair were matted up or the snap caps configuration on the cases were supplied. All I can say is what I have & 20ga snap caps will not fit in my 28ga cases.
|
||||||
|
|
|
||||||
|
|
|
| The Following 2 Users Say Thank You to David C Porter For Your Post: |
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
