![]() |
![]() |
![]() |
|||||||||||||||||||||||||||||||||||||
|
![]() |
Frame Size and Barrel Thickness | ![]() |
![]() |
#3 | ||||||
|
![]()
Chris ; Each number of parker frame size increases the firing pin separation by 1/16 inch, and the breech width by 1/8 inch. This means that the chamber and first few inches of barrel are nominally 1/16 inch larger in a gun with a 1 digit larger frame size. The customer could specify gun weight, so the frame and barrels can be thinner than the nominal size.
Another important point is that as frame size increases, the area in contact of breech ,water table and barrels increases, lessening the stress on the hinge and bolt areas. A lesser but important point is that the area of the butt in contact with the frame increases with frame size. A 1 1/2 or 2 frame gun will probably handle those loads for one or two hunts a year and show little stress. Both your shoulder and the gun will have a less stressful day if you find a heavier ( 8 plus pound) 2 or 3 frame gun. Best, Austin |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following 3 Users Say Thank You to Austin W Hogan For Your Post: |
![]() |
![]() |
![]() |
#4 | ||||||
|
![]()
Chris: 1 1/4 oz. 3 1/4 dram loads would be considered 'light' by pre-1900 Live Bird and Inanimate Target shooters. See https://docs.google.com/View?id=dfg2hmx7_333g89dwqg8
And they were limited to guns weighing less than 8 pounds "weighed naked" ![]() http://www.la84foundation.org/Sports.../SL3024020.pdf 100 year old wood might appreciate slightly less recoil however ![]()
__________________
http://sites.google.com/a/damascuskn...e.com/www/home Last edited by Drew Hause; 09-19-2010 at 09:13 PM.. |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following 2 Users Say Thank You to Drew Hause For Your Post: |
![]() |
![]() |
![]() |
#5 | ||||||
|
![]()
Thanks for the info. guys.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|