Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Finally got some better pics. It's an 1889 non rebounding hammerless with a couple of unusual (to me) features. 1. Notice the way the grip checkering is cut off at the grip cap. Never seen that before. I checked the wood for serial no. and the buttstock is original, although refinished with a Pachmayr recoil pad added. The checkering looks original. The stock shield is engraved with 3 initials in Old English. 2. The goofy non-factory beavertail with checkering designed to replicate the D and C forend style, but not as well done, no mullered borders, etc. 3. The 1910 boltplate indicates it was sent back to the factory after 20 years for some unknown work. The bores are honed to .800 (from the original .790), and wall thickness minima are .35 +- in the R and .40+- in the L. Chokes are .025 in each 30 in. bbl. 4. No birds on the gun--just dogs. The floorplate setter is the best, but curiously off center. The right side setter looks like he is squatting--not my favorite pose. The left side pointer is done much nicer. 5. Barrel flat stamps are hard to read, D4c, 5lb7 unstruck wt., gun weighs exactly 9 lbs. Note the crosshatching on the watertable. Still there after all these years. Seller thought it was an N grade and priced it accordingly. With issues above, I thought it was a fair price, even for a D. Will shoot it at late season pheasants until my arms get too tired.
The Following 9 Users Say Thank You to Mike Poindexter For Your Post:
Early hammerless guns with non rebounding hammers include the best engraved of all DH grade guns in my opinion.
56553 10 ga two frame and 56568 12ga one frame
have a single "looking back" dog on the floorplate.
The large detachable floorplate on the hammerless may have been a design feature to facilitate sending floorplates out for engraving.
Best, Austin
The Following User Says Thank You to Austin W Hogan For Your Post: